 | Max Value Sets the maximum value on the display in dBm or Watts. Min Value Sets the minimum value on the display in dBm or Watts. Offset Value Used to set external power attenuation or gain. The displayed power level is offset by the dB value entered. Relative On Off Press this submenu key to toggle relative power On or Off. This measurement shows the relative level of the current power level to the level when relative was turned on. When ON, the message Relative On shows in the message area. Units dBm Watts Sets the unit of measure for the power meter. Autoscale Adjusts the Top and Bottom values so that the power meter needle will be shown in the middle of the analog display. Fullscale Adjusts the Top and Bottom values to their maximum allowed values (default settings). |