Press this submenu key to save the current setup with a user defined filename. The default filename is changed using the Save menu. To change the default filename, type in a new filename with the number keyboard and press Enter. After a few seconds, the screen returns to File menu. Press the Save Measurement As key again and the new file name is used.

Press this key to display the Save Menu. Measurements can be saved to internal memory or to a USB flash drive. The saved measurement can be named by using the Save menu keys. By default, measurements are saved to internal memory in a directory named /user. The save destination is set with the Save Location Menu.

Press this key to display the Save Menu. Measurements can be saved to internal memory or to a USB flash drive. The saved setup, measurement, or JPEG file can be named in the Save menu. By default, measurements are saved to internal memory in a directory named /user. The save destination is set with the Save Location Menu.

Press this key to display the Save On ... Menu. This Save on Event submenu key is displayed only in Spectrum Analyzer and Interference Analyzer modes (models MS203xC).

Press this key to display the Recall Menu. This menu is for recalling measurements from internal memory or from a USB flash drive.

Press this key to display the Recall Menu. This menu is for recalling measurement or setup data from internal memory or from a USB flash drive.

Press this key to display the Copy Menu. The Copy menu is for copying files or folders from internal memory or a USB flash drive.

Press this key to display the Delete Menu and a selection box that shows the setup and measurement names and the type, date, and time that the information was saved. Use the rotary knob or the Up/Down arrow keys to highlight the file that is to be deleted, and then press the Delete submenu key, then press Enter. Press the Esc key to cancel the operation. Note that deleted files cannot be recovered.