 | Status Press this submenu key to display the current system status, including the operating system and firmware versions, temperatures, and other details such as current battery information. Press Esc or Enter to return to normal operation. Self Test Press this submenu key to initiate a series of diagnostic tests related to the performance of the motherboard hardware. A Self Test message box will list the individual tests with a Pass or Fail indication. Press Esc or Enter to return to normal operation. If the self test fails when the battery is fully charged and the instrument is within the specified operating temperature, contact your Anritsu Service Center and report the test results. Refer to Contacting Anritsu for Sales and Service. Application Self Test Press this submenu key to initiate a series of diagnostic tests related to the performance of the instrument for specific applications. A warning message advises you to disconnect any power-sensitive devices. Press the Esc key to abort, or press Enter to continue. Following completion, the Application Self Test window will list the tests with a Pass or Fail indication. Press Esc or Enter to return to normal operation. GPS Press this submenu key to open the GPS Menu. Calibrate Touch Screen If the instrument does not respond as expected when you press the touch screen, press this key to display the touch screen calibration message box. Refer to Touch Screen Calibration. Application Options This submenu changes with the measurement mode. Refer to Application Options Menu (VNA Mode) and Application Options Menu (SPA Mode). System Options Press this submenu key to open the System Options Menu. |