VectorStar™ MS464xB Series Microwave Vector Network Analyzer Calibration and Measurement Guide : Noise Figure (Option 41) : References
 
References
1. H. T. Friis, “Noise figure of radio receivers,” Proc. IRE, vol. 32, Jul. 1944, pp. 419-422.
2. —, “Noise Figure”, Anritsu Application Note 11410-00210, Aug. 2000.
3. D. Vondran, “Noise figure measurement: corrections related to match and gain,” Microwave Journal, Mar. 1999, pp. 22-38.
4. N. Otegi, J. M. Collantes, and M. Sayed, “Cold-source measurements for noise figure calculation in spectrum analyzers,” 67th ARFTG Conf. Dig., Jun. 2006, pp. 223-228.
5. N. Otegi, J. M. Collantes, and M. Sayed, “Receiver noise calibration for vector network analyzer,” 76th ARFTG Conf. Dig., Dec. 2010, pp. 1-5.
6. J. M. Collantes, R. D. Pollard, and M. Sayed, “Effects of DUT mismatch on the noise figure characterization: A comparative analysis of two Y-factor techniques,” IEEE Trans. Instr. And Meas., vol. 51, Dec. 2002, pp. 1150-1156.
7. L. Escotte, R. Plana, and J. Graffeuil, “Evaluation of noise parameter extraction methods,” IEEE Trans. Micr. Theory Tech., vol. 41, Mar 1993, pp. 382-387.
8. —, “Supplement 1 to the “Guide to the expression of uncertainty in measurement” — Propagation of distributions using a Monte Carlo method”, Joint Committee for Guides in Metrology, 2008.