VectorStar™ MS464xB Series Microwave Vector Network Analyzer Calibration and Measurement Guide : Differential Noise Figure (Option 48) : References
 
References
1. J. Randa, “Noise characterization of multiport amplifiers,” IEEE Trans. Micr. Theory Techn., vol. 49, pp. 1757-1763, Oct. 2001.
2. S. Wedge and D. Rutledge, “Noise waves and passive linear multiports,” IEEE Micr. Guid. Wave Lett., vol. 1, pp. 117-119, May 1991.
3. L. Boglione, “Generalized determination of device noise parameters,” IEEE Trans. Micr. Theory Techn., vol. 65, pp. 4014-4025, Oct. 2017.
4. Y. Chang, S. Lin, H. Liao, H. Chiou, and Y. Juang, “On-wafer differential noise figure and large signal measurements of low-noise amplifier,” Proc. 39th Eur. Micr. Conf., Oct. 2009, pp. 699-702.
5. J. Dunsmore and S. Wood, “Vector corrected noise figure and noise parameter measurements of differential amplifiers,” Proc. 39th Eur. Micr. Conf., Oct. 2009, pp. 707-710.
6. M. Robens, R. Wunderlich, and S. Heinen, “Differential noise figure de-embedding: a comparison of available approaches,” IEEE Trans. Micr. Theory Techn., vol. 59, pp. 1397-1407, May 2011.
7. Y. Andee, C. Arnaud, F. Graux, and F. Danneville, “De-embedding differential noise figure using the correlation of noise output waves,” 84th ARFTG Conf. Dig., Dec. 2014, pp. 1-4.
8. A. A. Michelson and E. W. Morley, “On the relative motion of the earth and the luminiferous ether”. American Journal of Science, vol. 34, pp. 333–345, Dec. 1887.