VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : Minimum/Maximum Frequency Limits and Related Parameters
 
Minimum/Maximum Frequency Limits and Related Parameters
The minimum and maximum instrument frequencies depend on the instrument model, the installed options, and whether the VNA is a standalone unit or part of a system. See General Information, Minimum/Maximum Instrument Frequency and Related Parameters for additional information. The following tables for standalone VNA frequency limits are available:
Table: Standalone VNAs – Default Start, Default CW, and Default Stop Frequencies
Table: Standalone VNAs – Minimum Start, Minimum CW, and Maximum Start Frequencies
Table: Standalone VNAs – Minimum Stop, Maximum Stop, and Maximum CW Frequencies
Table: Standalone VNAs – Default Frequency Span and Maximum Frequency Span
Table: Standalone VNAs – Minimum Center Frequency and Maximum Center Frequency
Table: Standalone VNAs – Default Center Frequencies
For general information on frequency limits for VectorStar VNAs in systems, also in General Information, see:
VNA Systems with ME7828A Configured as Broadband System
VNA Systems with ME7828A Configured as a Millimeter-Wave System
VNA Systems with ME7828A Using Multiple Source
VNA Systems with ME7838x Modular Broadband System