VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :CALCulate{1-16}:SNPSetup Subsystem
 
:CALCulate{1-16}:SNPSetup Subsystem
The :CALCulate{1-16}:SNPSetup subsystem commands are used to select options related to the data saved in SnP files.
:CALCulate{1-16}:SNPSetup:CAUSality:ENForce[:STATe] <char>
:CALCulate{1-16}:SNPSetup:CAUSality:ENForce[:STATe]?
Description
The command Turns On/Off state of Causality Enforcement on the given channel.
The query outputs the On/Off state of Causality Enforcement on the given channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC:SNPS:CAUS:ENF ON
:CALC:SNPS:CAUS:ENF?
:CALCulate{1-16}:SNPSetup:GATed:DATa[:STATe] <char>
:CALCulate{1-16}:SNPSetup:GATed:DATa[:STATe]?
Description
The command turns On/Off the option for saving gated data into .sNp files on the indicated channel.
The query outputs the On/Off state of the option for saving gated data into .sNp files on the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Range
NA
Default Value
0
Syntax Example
:CALC1:SNPS:GAT:DAT ON
:CALC1:SNPS:GAT:DAT?
:CALCulate{1-16}:SNPSetup:INTerpolation:TYPE <char>
:CALCulate{1-16}:SNPSetup:INTerpolation:TYPE?
Description
The command selects the sNp interpolation type for the given channel.
The query outputs the sNp interpolation type for the given channel.
Cmd Parameters
<char> AUTO | SPLine | LINear
Query Parameters
NA
Query Output
<char> AUTO | SPLine | LINear
Range
NA
Default Value
SPL
Syntax Example
:CALC1:SNPS:INT:TYPE AUTO
:CALC1:SNPS:INT:TYPE?
 
:CALCulate{1-16}:SNPSetup:MATH:DATa[:STATe] <char>
:CALCulate{1-16}:SNPSetup:MATH:DATa[:STATe]?
Description
The command turns On/Off state of Save Trace Math Data into .sNp files on the given channel.
The query outputs the On/Off state of Save Trace Math Data into .sNp files on the given channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:SNPS:MATH:DAT ON
:CALC1:SNPS:MATH:DAT?
:CALCulate{1-16}:SNPSetup:PASSivity:ENForce[:STATe] <char>
:CALCulate{1-16}:SNPSetup:PASSivity:ENForce[:STATe]?
Description
Turns on/off the state of Passivity Enforcement on the given channel.
The query outputs the state of Passivity Enforcement on the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:SNPS:PASS:ENF 1
:CALC1:SNPS:PASS:ENF?
:CALCulate{1-16}:SNPSetup:PASSivity:FIRSt[:STATe] <char>
:CALCulate{1-16}:SNPSetup:PASSivity:FIRSt[:STATe]?
Description
The command sets the Passivity First state value on the given channel. (Passivity First ON means passivity enforcement is done prior to causality enforcement.)
The query outputs the of Passivity First state value on the given channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC:SNPS:PASS:FIRS ON
:CALC:SNPS:PASS:FIRS?
:CALCulate{1-16}:SNPSetup:PASSivity:TOLerance <NRf>
:CALCulate{1-16}:SNPSetup:PASSivity:TOLerance?
Description
Sets the Passivity tolerance value on the indicated channel.
The query outputs the Passivity tolerance value on the indicated channel.
Cmd Parameters
<NR2> The input parameter is a unitless number.
Query Parameters
NA
Query Output
<NR2> The output is a unitless number.
Range
0 – 1 (recommend 0.0000001 to 0.001)
Default Value
0.00001
Syntax Example
:CALC1:SNPS:PASS:TOL 0.001
:CALC1:SNPS:PASS:TOL?