:CALCulate{1-16}:TMS Subsystem
The :CALCulate{1-16}:TMS subsystem commands control the true mode stimulus configuration within the DifferentialView™ application.
:CALCulate{1-16}:TMS:COHerence[:STATe] <char>
:CALCulate{1-16}:TMS:COHerence[:STATe]?
Description
The command turns On/Off state of TMS Coherence switch on the given channel.
The query outputs the On/Off state of TMS Coherence switch on the given channel.
Applies only to broadband and banded 3739 modes.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:TMS:COH ON
:CALC1:TMS:COH?
:CALCulate{1-16}:TMS:MODe <char>
:CALCulate{1-16}:TMS:MODe?
Description
Configures the stimulus mode on the indicated channel. Returns the stimulus mode on the indicated channel.
Cmd Parameters
<char> TMSO | TMSD | TMSR | TMSS
TMSO = TMS Off (Single-ended)
TMSD = TMS Drive
TMSR = TMS Reverse
TMSS = Source (Ref Plane)
Query Parameters
<char> TMSO | TMSD | TMSR | TMSS
Range
NA
Default Value
TMSO
Syntax Example
CALC1:TMS:MOD TMSS
CALC1:TMS:MOD?
:CALCulate{1-16}:TMS:PHASe:SWEep[:STATe] <char>
:CALCulate{1-16}:TMS:PHASe:SWEep[:STATe]?
Description
Turns on/off the state of phase sweep on the indicated channel. Outputs the on/off state of the phase sweep on the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:TMS:PHAS:SWE ON
:CALC1:TMS:PHAS:SWE?
:CALCulate{1-16}:TMS:PHASe:SWEep:POINts <NRf>
:CALCulate{1-16}:TMS:PHASe:SWEep:POINts?
Description
Sets the phase sweep number of points on the indicated channel. Returns the phase sweep number of points on the indicated channel.
Cmd Parameters
<NRf> The input parameter is a unit less number.
Query Parameters
<NR1> The output parameter is an integer.
Range
2 to instrument number of points setting (25000 or 100000).
Default Value
2
Syntax Example
:CALC1:TMS:PHAS:SWE:POIN 201
:CALC1:TMS:PHAS:SWE:POIN?
:CALCulate{1-16}:TMS:PHASe:SWEep:STARt <NRf>
:CALCulate{1-16}:TMS:PHASe:SWEep:STAR?
Description
Sets the phase sweep start phase on the indicated channel. Returns the phase sweep start phase on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in degrees.
Query Parameters
<NR3> The output parameter is in degrees.
Range
–3600 to +3600
Default Value
0
Syntax Example
:CALC1:TMS:PHAS:SWE:STAR 3.0E1
:CALC1:TMS:PHAS:SWE:STAR?
:CALCulate{1-16}:TMS:PHASe:SWEep:STOP <NRf>
:CALCulate{1-16}:TMS:PHASe:SWEep:STOP?
Description
Sets the phase sweep stop phase on the indicated channel. Returns the phase sweep stop phase on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in degrees.
Query Parameters
<NR3> The output parameter is in degrees.
Range
–3600 to +3600
Default Value
180.00
Syntax Example
:CALC1:TMS:PHAS:SWE:STOP 1.8E2
:CALC1:TMS:PHAS:SWE:STOP?
:CALCulate{1-16}:TMS:POWer:OFFSet <NRf>
:CALCulate{1-16}:TMS:POWer:OFFSet?
Description
Sets the TMS power offset on the indicated channel. Returns the TMS power offset on the indicated channel.
Cmd Parameters
<NRf> The input parameter is in dB.
Query Parameters
<NR3> The output parameter is in dB.
Range
–50 dB to +50 dB
Default Value
0
Syntax Example
:CALC1:TMS:POW:OFFS 10
:CALC1:TMS:POW:OFFS?
:CALCulate{1-16}:TMS:REFerence:PORT <char>
:CALCulate{1-16}:TMS:REFerence:PORT?
Description
Selects the reference port of the indicated channel. Outputs the reference port of the indicated channel.
Cmd Parameters
<char> PORT1 | PORT2 | PORT3 | PORT4
Query Parameters
<char> PORT1 | PORT2 | PORT3 | PORT4
Range
NA
Default Value
PORT1
Syntax Example
:CALC1:TMS:REF:PORT PORT2
:CALC1:TMS:REF:PORT?