Remote Spectrum Monitors : MS27102A Installation : Installing the Ethernet Cable
 
Installing the Ethernet Cable
The instrument’s Ethernet connector accepts any standard 8P8C (RJ45) plug. However, for the connection to be weatherproof, the weatherproofing gland must be installed around the connector and cable. The following illustration shows how to install the Ethernet connector’s weatherproof gland.
Ethernet Gland Assembly
1. Screw gland body to instrument front panel
2. Thread Ethernet cable through the gland’s components and secure the seal.
3. Plug the Ethernet cable into the instrument and tighten the sealing nut.