Vision™ MX280001A Spectrum Monitoring Application Software : Vision Simulator : Introduction : Using the Vision Simulator Control Program
 
Using the Vision Simulator Control Program
The Vision Simulator Control program provides a single screen interface. Google Maps is loaded from the Simulator program and displays a geo map as shown in Figure: Simulator GUI. This shows the location of the simulated probes along with a series of locations that are used to simulate RF sources. These RF source locations can represent:
• Interference sources when working with Power of Arrival (PoA) or Time Difference of Arrival (TDOA).
• A series of locations when tracking a moving RF emitter.
Note 
The Simulator Program and the simulated target receivers do not have regional settings; therefore, the numbers are displayed in US-English notation.