The demo application for MA241xxA series USB power sensors allows you to interface with the sensor using the remote programming protocol. To download the drivers and demo application, go to the "Library" section of the product page for your sensor at: http://www.anritsu.com. The Demo Application's interface is shown in Figure 1-A below:
Demo Application
Anritsu recommends that you use the source code and project available on the Anritsu website to get the latest version.
Launch the Demo Application:
1. User must close all applications which communicate with power sensors prior to running the Demo Application. The driver and demo app folder on anritsu.com provides the Overview, Getting Started Instructions and Sample Code to launch the Demo Application. Double click onDemoApp.exe. The application screen shown in Figure: Demo Application will appear.
2. Connect the power sensor to the PC using the USB cable and click Find Devices.
3. Select the desired sensor from the device list and click Open Device
4. Once the device is opened successfully, you can use the function buttons provided for power readings, frequency readings and settings. Find the Code C# link in your downloaded folder as well.
