PowerXpert™ Help : Using Power Master with PowerXpert : Continuous Mode
 
Continuous Mode
Continuous Mode is the default mode in which the MA245xxA Power Master starts and displays the peak or average power of the input signal. In this mode, the Power Master is “continuously triggered” and collects data at all times. The Continuous Mode window below contains the following information.
Continuous Mode User Interface Screen
Continuous Mode Setting
Options/Range
Measurement
Channel Power / CW Max
Center Frequency
(MA24507A)
9.5 kHz to 70 GHz - 500 Hz
Center Frequency
(MA24510A)
9.5 kHz to 110 GHz - 500 Hz
Center freq units
kHz, MHz, GHz
Span
30 kHz to 2 GHz (Channel power), 30 kHz to Full span (CW max)
Span units
kHz, MHz, GHz
Relative
Off, On
Units
dBm, nW, µW, mW, W
Resolution
Low, Medium, High (Available in CW max mode)
Range
Upper, Lower
Measurement hold
Off, On
General Settings
Averages
1 to 1000
Offset (dB)
–100 to +150
Apply Above Settings
Select Activates Settings