1. Connect the power sensor to the USB port of the PC with the supplied USB cable.
2. When the Found New Hardware Wizard installation screen appears, select No, not this time to search for software, and then click Next.
Found New Hardware Wizard
3. Select Install the software automatically (Recommended), and then click Next.
Found New Hardware Wizard
4. Select the sensor being installed from the list, then click Next as shown below.
Found New Hardware Wizard
5. The Hardware Installation warning dialog appears as shown below. Click Continue Anyway.
Hardware Installation Warning
The hardware driver installs.
Found New Hardware Wizard
6. When the installation is complete, click Finish to close the wizard.
For the MA241xxA series, the status LED should illuminate green indicating that the sensor is ready to use.
If the status LED illuminates amber color, refer to the “Error States” section in the “Using the MA241xxA” chapter for your sensor.
For the MA242x8A, MA243x0A and MA245xxA series, the status LED should be solid green indicating that the sensor is ready to use.
If the status LED blinks green, refer to the “Error States” section in the “Using the MA242x8A” chapter for your sensor.
Found New Hardware Wizard
7. The power sensor is now ready for use. Launch the Anritsu PowerXpert application from the new desktop icon or from the Start | Programs | Anritsu menu. Refer to Using USB Power Sensors with PowerXpert for information about using the Anritsu PowerXpert application.