The Site Master batteries are installed at the factory and can be replaced by the user.
1. Power off the Site Master and remove the bottom bumper to expose the battery cover plate.
2. Set the unit face up on a secure surface and remove the six (6) screws holding the battery cover plate (Figure: Remove the Battery Cover Plate). Remove the cover plate and note the orientation for reassembly.
Remove the Battery Cover Plate
3. Carefully disconnect the battery connector and remove the battery. Repeat for the second battery (Figure: Replacing the Batteries).
Replacing the Batteries
4. Slide the new batteries into the two battery bays and carefully plug in the battery connectors.(Figure: Adding the Second Battery).
Adding the Second Battery
5. Reattach the battery cover plate with the 6 six screws and put the bottom bumper back on the Site Master.
