IEEE Commands

VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : IEEE Commands

IEEE Commands

Introduction

Command Descriptions

Numeric Limits

IEEE 488.2 Commands

Introduction

This chapter contains all of the IEEE commands that are implemented in the instrument.

Note

When operating the VectorStar VNA through remote programming, the front panel user interface and controls are disabled. To return to local front panel control, press the front panel Clear/Tab key [Clr -->|], keyboard Esc key, or send the RTL command.

For general information about GPIB, refer to IEEE 488 GPIB Description.


	Anritsu Company 1-800-ANRITSU 10450-00040 Rev. AB