VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :CALCulate{1-16}:PARameter{1-16}:MEMory and MEMory{1-20} Subsystem
 
:CALCulate{1-16}:PARameter{1-16}:MEMory and MEMory{1-20} Subsystem
The :CALCulate{1-16}:PARameter{1-16}:MEMory{1-20} subsystem commands configure multiple memory-related items for specified traces. Each channel has up to 20 memory traces that are accessible to all display traces.
Memory Subsystems
Related memory commands are described in the following subsystems:
• :CALCulate{1-16}:PARameter{1-16}:MEMory and MEMory{1-20} Subsystem
• :CALCulate{1-16}[:SELected]:MEMory{1-20} Subsystem
• :CALCulate{1-16}[:SELected]:PARameter{1-16}:MEMory Subsystem
:CALCulate{1-16}:PARameter{1-16}:MEMory:CONFig <char>
:CALCulate{1-16}:PARameter{1-16}:MEMory:CONFig?
Description
The command sets the store to memory setting (options include UseSpecifiedMemoryLocation, UseLastLocation, Increment).
The query outputs the store to memory setting (options include UseSpecifiedMemoryLocation, UseLastLocation, Increment).
Cmd Parameters
<char> SPECified | LAST | INCRement
Query Parameters
NA
Query Output
<char> SPEC | LAST | INCR
Range
NA
Default Value
LAST
Syntax Example
:CALC1:PAR1:MEM:CONF SPEC
:CALC1:PAR1:MEM:CONF?
:CALCulate{1-16}:PARameter{1-16}:MEMory{1-20}:DISPlay:STATe <char>
:CALCulate{1-16}:PARameter{1-16}:MEMory{1-20}:DISPlay:STATe?
Description
The command sets display state (ON/OFF) of the indicated memory location for the specified trace and channel.
The query outputs the display state of the indicated memory location for the specified trace and channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:PAR1:MEM1:DISP:STAT 1
:CALC1:PAR1:MEM1:DISP:STAT?
:CALCulate{1-16}:PARameter{1-16}:MEMory:DMARker <char>
:CALCulate{1-16}:PARameter{1-16}:MEMory:DMARker?
Description
The command sets the dominant memory trace to be used for marker for the given channel and trace.
The query outputs the dominant memory trace to be used for marker for the given channel and trace.
Cmd Parameters
<char> ML1 | ML2 | ML3 | ML4 | ML5 | ML6 | ML7 | ML8 | ML9 | ML10 | ML11 | ML12 | ML13 | ML14 | ML15 | ML16 | ML17 | ML18 | ML19 | ML20
Query Parameters
NA
Query Output
<char> ML1 | ML2 | ML3 | ML4 | ML5 | ML6 | ML7 | ML8 | ML9 | ML10 | ML11 | ML12 | ML13 | ML14 | ML15 | ML16 | ML17 | ML18 | ML19 | ML20
Range
NA
Default Value
ML1 for Trace1, ML2 for Trace2, ... , ML16 for Trace16
Syntax Example
:CALC1:PAR1:MEM:DMAR ML2
:CALC1:PAR1:MEM:DMAR?
:CALCulate{1-16}:PARameter{1-16}:MEMory:DMSaverecall <char>
:CALCulate{1-16}:PARameter{1-16}:MEMory:DMSaverecall?
Description
The command sets the memory math location to use for given channel and trace.
The query outputs the memory math location to use for given channel and trace.
Cmd Parameters
<char> ML1 | ML2 | ML3 | ML4 | ML5 | ML6 | ML7 | ML8 | ML9 | ML10 | ML11 | ML12 | ML13 | ML14 | ML15 | ML16 | ML17 | ML18 | ML19 | ML20
Query Parameters
NA
Query Output
<char> ML1 | ML2 | ML3 | ML4 | ML5 | ML6 | ML7 | ML8 | ML9 | ML10 | ML11 | ML12 | ML13 | ML14 | ML15 | ML16 | ML17 | ML18 | ML19 | ML20
Range
NA
Default Value
ML1 for Trace1, ML2 for Trace2, ... , ML16 for Trace16
Syntax Example
:CALC1:PAR2:MEM:DMS ML1
:CALC1:PAR2:MEM:DMS?
:CALCulate{1-16}:PARameter{1-16}:MEMory:MMLocation <char>
:CALCulate{1-16}:PARameter{1-16}:MEMory:MMLocation?
Description
The command sets memory math location to use for given channel and trace.
The query outputs memory math location to be used for given channel and trace.
Cmd Parameters
<char> ML1 | ML2 | ML3 | ML4 | ML5 | ML6 | ML7 | ML8 | ML9 | ML10 | ML11 | ML12 | ML13 | ML14 | ML15 | ML16 | ML17 | ML18 | ML19 | ML20
Query Parameters
NA
Query Output
<char> ML1 | ML2 | ML3 | ML4 | ML5 | ML6 | ML7 | ML8 | ML9 | ML10 | ML11 | ML12 | ML13 | ML14 | ML15 | ML16 | ML17 | ML18 | ML19 | ML20
Range
NA
Default Value
ML1 for Trace1, ML2 for Trace2, ... , ML16 for Trace16
Syntax Example
:CALC1:PAR1:MEM:MML ML2
:CALC1:PAR1:MEM:MML?