VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :CALCulate{1-16}[:SELected]:MSTatistics Subsystem
 
:CALCulate{1-16}[:SELected]:MSTatistics Subsystem
The :CALCulate{1-16}[:SELected]:MSTatistics subsystem provides commands for settings of Time Domain, eye-diagram marker statistics.
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:AMPLitude[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:AMPLitude[:STATe]?
Description
The command sets the 'eye amplitude' display state to ON/OFF for the active trace of the indicated channel for NRZ signaling type. This corresponds to the Amplitude selection on the AMPLITUDE SETUP menu.
The query outputs the 'eye amplitude' display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:AMPL 0
:CALC1:MST:EYE:AMPL?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:ARELated[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:ARELated[:STATe]?
Description
The command sets the display ON/OFF of the amplitude-related eye statistics for the given trace of the indicated channel for NRZ signaling type.
The query outputs the display state of the amplitude-related eye statistics for the given trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MST:EYE:AREL 1
:CALC1:MST:EYE:AREL
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:CPERcentage[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:CPERcentage[:STATe]?
Description
The command sets eye crossing percentage display state to ON/OFF for the active trace of the indicated channel for NRZ signaling type.
The query outputs the eye crossing percentage display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:CPER 1
:CALC1:MST:EYE:CPER?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:DCDistortion[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:DCDistortion[:STATe]?
Description
The command sets the 'eye duty cycle distortion' display state to ON/OFF for the active trace of the indicated channel for NRZ signaling type. This corresponds to the Duty Cycle Distortion selection on the TIME SETUP menu.
Outputs the 'eye duty cycle distortion' display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:DCD 0
:CALC1:MST:EYE:DCD?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:FTIMe[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:FTIMe[:STATe]?
Description
The command sets the 'eye fall time' display state to ON/OFF for the active trace of the indicated channel for NRZ signaling type. This corresponds to the Fall Time selection on the TIME SETUP menu.
The query outputs the 'eye fall time' display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:FTIM 0
:CALC1:MST:EYE:FTIM?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:HEIGht[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:HEIGht[:STATe]?
Description
The command sets the 'eye height' display state to ON/OFF for the active trace of the indicated channel for NRZ signaling type. This corresponds to the Height selection on the AMPLITUDE SETUP menu.
The query outputs the 'eye height' display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:HEIG 0
:CALC1:MST:EYE:HEIG?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:MARKer:POSition <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:MARKer:POSition?
Description
The command sets the eye marker position on the active trace of the indicated channel for NRZ signaling type. Command parameter definitions are:
• ULEFt = Upper Left
• URIGht = Upper Right
• LLEFt = Lower Left
• LRIGht = Lower Right
• DSOFf = Display Off
• CUSTom = Custom Location (defined by X and Y coordinates)
The query outputs the eye marker position on the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> ULEFt | URIGht | LLEFt | LRIGht | DSOFf | CUSTom
Query Parameters
NA
Query Output
<char> ULEF | URIG | LLEF | LRIG | DSOF | CUST
Range
NA
Default Value
ULEF
Syntax Example
:CALC1:MST:EYE:MARK:POS ULEF
:CALC1:MST:EYE:MARK:POS?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:MARKer:POSition:X <NRf>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:MARKer:POSition:X?
Description
The command sets the X offset location of the Eye Statistics readout for the given trace on the indicated channel for NRZ signaling type. This command requires Marker Data Display Position to be set to 'CUSTom'. To set to CUSTom, refer to the command:
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:MARKer:POSition <char>
The query outputs the X Offset location of the Eye Statistics readout for the given trace on the indicated channel for NRZ signaling type.
The location is the top left corner of the trace display area. A value in the range of 0-100 can be set which can suitably get coerced based on the display size of the trace.
Cmd Parameters
<NR3> The input parameter is a unitless number between 0-100.
Query Parameters
NA
Query Output
<NR3> The output parameter is a unitless number value between 0-100.
Range
0 to 100
Default
0
Syntax Example
:CALC1:MST:EYE:MARK:POS:X 1.0E1
:CALC1:MST:EYE:MARK:POS:X?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:MARKer:POSition:Y <NRf>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:MARKer:POSition:Y?
Description
The command sets the Y offset location of the Eye Statistics readout for the given trace on the indicated channel for NRZ signaling type. This command requires Marker Data Display Position to be set to 'CUSTom'. To set to CUSTom, refer to the command:
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:MARKer:POSition <char>
The query outputs the Y Offset location of the Eye Statistics readout for the given trace on the indicated channel for NRZ signaling type.
The location is the top left corner of the trace display area. A value in the range of 0-100 can be set which can suitably get coerced based on the display size of the trace.
Cmd Parameters
<NR3> The input parameter is a unitless value between 0-100.
Query Parameters
NA
Query Output
<NR3> The output parameter is a unitless value between 0-100.
Range
0-100
Default Value
0
Syntax Example
:CALC1:MST:EYE:MARK:POS:Y 1.0E1
:CALC1:MST:EYE:MARK:POS:Y?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:MLEVel[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:MLEVel[:STATe]?
Description
The command sets the 'eye level mean' display state to ON/OFF for the active trace of the indicated channel for NRZ signaling type. This corresponds to the Level Mean selection on the AMPLITUDE SETUP menu.
The query outputs the 'eye level mean' display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:MLEV 0
:CALC1:MST:EYE:MLEV?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:OFACtor[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:OFACtor[:STATe]?
Description
The command sets the 'eye opening factor' display state to ON/OFF for the active trace of the indicated channel for NRZ signaling type. This corresponds to the Opening Factor selection on the AMPLITUDE SETUP menu.
The query outputs the 'eye opening factor' display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:OFAC 0
:CALC1:MST:EYE:OFAC?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:OLEVel[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:OLEVel[:STATe]?
Description
The command sets the 'eye level 1' display state for to ON/OFF for the active trace of the indicated channel for NRZ signaling type. This corresponds to the ‘1’ Level selection on the AMPLITUDE SETUP menu.
The query outputs the 'eye level 1' display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:OLEV 0
:CALC1:MST:EYE:OLEV?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:PPJitter[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:PPJitter[:STATe]?
Description
The command sets the 'eye PP jitter' display state to ON/OFF for the active trace of the indicated channel for NRZ signaling type. This corresponds to the Pk-Pk Jitter selection on the TIME SETUP menu.
The query outputs the 'eye PP jitter' display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PPJ 0
:CALC1:MST:EYE:PPJ?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:RMSJitter[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:RMSJitter[:STATe]?
Description
The command sets the 'eye RMS jitter' display state to ON/OFF for the active trace of the indicated channel for NRZ signaling type. This corresponds to the RMS Jitter selection on the TIME SETUP menu.
The query outputs the 'eye RMS jitter' display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:RMSJ 0
:CALC1:MST:EYE:RMSJ?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:RTIMe[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:RTIMe[:STATe]?
Description
The command sets the 'eye rise time' display state to ON/OFF for the active trace of the indicated channel for NRZ signaling type. This corresponds to the Rise Time selection on the TIME SETUP menu.
The query outputs the 'eye rise time' display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:RTIM 0
:CALC1:MST:EYE:RTIM?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:SNRatio[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:SNRatio[:STATe]?
Description
The command sets the 'eye signal to noise' display state to ON/OFF for the active trace of the indicated channel for NRZ signaling type. This corresponds to the Signal to Noise selection on the AMPLITUDE SETUP menu.
The query outputs the 'eye signal to noise' display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:SNR 0
:CALC1:MST:EYE:SNR?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:TRELated[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:TRELated[:STATe]?
Description
The command sets the display ON/OFF of the time-related eye statistics for the given trace of the indicated channel for NRZ signaling type.
The query outputs the display state of the time-related eye statistics for the given trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MST:EYE:TREL 1
:CALC1:MST:EYE:TREL?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:WIDth[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:WIDth[:STATe]?
Description
The command sets the 'eye width' display state to ON/OFF for the active trace of the indicated channel for NRZ signaling type. This corresponds to the Width selection on the Time Setup menu.
The query outputs the 'eye width' display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:WID 0
:CALC1:MST:EYE:WID?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:ZLEVel[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE[:NRZ]:ZLEVel[:STATe]?
Description
The command sets the 'eye level 0' display state to ON/OFF for the active trace of the indicated channel for NRZ signaling type. This corresponds to the ‘0’ Level selection on the AMPLITUDE SETUP menu.
The query outputs the 'eye level 0' display state for the active trace of the indicated channel for NRZ signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:ZLEV 0
:CALC1:MST:EYE:ZLEV?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:AMPLitude[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:AMPLitude[:STATe]?
Description
The command sets the 'eye amplitude' display state to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling type. This corresponds to the Amplitude selection on the AMPLITUDE SETUP menu.
The query outputs the 'eye amplitude' display state for the active trace of the indicated channel for the indicated eye for PAM-4 signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:AMPL 0
:CALC1:MST:EYE:PAM4:EYE1:AMPL?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:ARELated[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:ARELated[:STATe]?
Description
The command sets the display ON/OFF of the amplitude-related eye statistics for the active trace of the indicated channel for PAM-4 signaling type.
The query outputs the display state of the amplitude-related eye statistics for the active trace of the indicated channel for the indicated eye for PAM-4 signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MST:EYE:PAM4:AREL 1
:CALC1:MST:EYE:PAM4:AREL
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:CPERcentage[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:CPERcentage[:STATe]?
Description
The command sets eye crossing percentage display state to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling type.
The query outputs the eye crossing percentage display state for the active trace of the indicated channel for PAM-4 signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:CPER 1
:CALC1:MST:EYE:PAM4:EYE1:CPER?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:DCDistortion[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:DCDistortion[:STATe]?
Description
The command sets the 'eye duty cycle distortion' display state to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling. This corresponds to the Duty Cycle Distortion selection on the TIME SETUP menu.
Outputs the 'eye duty cycle distortion' display state type for the active trace of the indicated channel for the indicated eye for PAM-4 signaling.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:DCD 0
:CALC1:MST:EYE:PAM4:EYE1:DCD?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:FTIMe[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:FTIMe[:STATe]?
Description
The command sets the 'eye fall time' display state to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling. This corresponds to the Fall Time selection on the TIME SETUP menu.
The query outputs the 'eye fall time' display state for the active trace of the indicated channel for the indicated eye for PAM-4 signaling.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:FTIM 0
:CALC1:MST:EYE:PAM4:EYE1:FTIM?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:HEIGht[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:HEIGht[:STATe]?
Description
The command sets the 'eye height' display state to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling. This corresponds to the Height selection on the AMPLITUDE SETUP menu.
The query outputs the 'eye height' display state for the active trace of the indicated channel for the indicated eye for PAM-4 signaling.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:HEIG 0
:CALC1:MST:EYE:PAM4:EYE1:HEIG?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:MARKer:POSition <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:MARKer:POSition?
Description
The command sets the eye marker position on the active trace of the indicated channel for PAM-4 signaling.Command parameter definitions are:
• ULEFt = Upper Left
• URIGht = Upper Right
• LLEFt = Lower Left
• LRIGht = Lower Right
• DSOFf = Display Off
• CUSTom = Custom Location (defined by X and Y coordinates)
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:MARKer:POSition:X <NRf>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:MARKer:POSition:Y <NRf>
The query outputs the eye marker position on the active trace of the indicated channel for PAM-4 signaling.
Cmd Parameters
<char> ULEFt | URIGht | LLEFt | LRIGht | DSOFf | CUSTom
Query Parameters
NA
Query Output
<char> ULEF | URIG | LLEF | LRIG | DSOF | CUST
Range
NA
Default Value
ULEF
Syntax Example
:CALC1:MST:EYE:PAM4:MARK:POS ULEF
:CALC1:MST:EYE:PAM4:MARK:POS?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:MARKer:POSition:X <NRf>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:MARKer:POSition:X?
Description
The command sets the X offset location of the Eye Statistics readout for the given trace on the indicated channel for PAM-4 signaling. This command requires Marker Data Display Position to be set to 'CUSTom'. To set to CUSTom, refer to the command:
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:MARKer:POSition <char>
The query outputs the X Offset location of the Eye Statistics readout for the given trace on the indicated channel for PAM-4 signaling.
The location is the top left corner of the trace display area. A value in the range of 0-100 can be set which can suitably get coerced based on the display size of the trace.
Cmd Parameters
<NR3> The input parameter is a unitless number between 0-100.
Query Parameters
NA
Query Output
<NR3> The output parameter is a unitless number value between 0-100.
Range
0 to 100
Default
0
Syntax Example
:CALC1:MST:EYE:PAM4:MARK:POS:X 1.0E1
:CALC1:MST:EYE:PAM4:MARK:POS:X?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:MARKer:POSition:Y <NRf>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:MARKer:POSition:Y?
Description
The command sets the Y offset location of the Eye Statistics readout for the given trace on the indicated channel for PAM-4 signaling. This command requires Marker Data Display Position to be set to 'CUSTom'. To set to CUSTom, refer to the command:
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:MARKer:POSition <char>
The query outputs the Y Offset location of the Eye Statistics readout for the given trace on the indicated channel for PAM-4 signaling.
The location is the top left corner of the trace display area. A value in the range of 0-100 can be set which can suitably get coerced based on the display size of the trace.
Cmd Parameters
<NR3> The input parameter is a unitless value between 0-100.
Query Parameters
NA
Query Output
<NR3> The output parameter is a unitless value between 0-100.
Range
0-100
Default Value
0
Syntax Example
:CALC1:MST:EYE:PAM4:MARK:POS:Y 1.0E1
:CALC1:MST:EYE:PAM4:MARK:POS:Y?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:MLEVel[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:MLEVel[:STATe]?
Description
The command sets the 'eye level mean' display state to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling. This corresponds to the Level Mean selection on the AMPLITUDE SETUP menu.
The query outputs the 'eye level mean' display state for the active trace of the indicated channel for the indicated eye for PAM-4 signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:MLEV 0
:CALC1:MST:EYE:PAM4:EYE1:MLEV?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:OFACtor[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:OFACtor[:STATe]?
Description
The command sets the 'eye opening factor' display state to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling. This corresponds to the Opening Factor selection on the AMPLITUDE SETUP menu.
The query outputs the 'eye opening factor' display state for the active trace of the indicated channel for the indicated eye for PAM-4 signaling type.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:OFAC 0
:CALC1:MST:EYE:PAM4:EYE1:OFAC?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:HLEVel[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:HLEVel[:STATe]?
Description
The command sets the high-level display state for to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling. This corresponds to the ‘1’ Level selection on the AMPLITUDE SETUP menu.
The query outputs the low-level display state for the active trace of the indicated channel for the indicated eye for PAM-4 signaling.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:HLEV 0
:CALC1:MST:EYE:PAM4:EYE1:HLEV?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:PPJitter[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:PPJitter[:STATe]?
Description
The command sets the 'eye PP jitter' display state to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling. This corresponds to the Pk-Pk Jitter selection on the TIME SETUP menu.
The query outputs the 'eye PP jitter' display state for the active trace of the indicated channel for the indicated eye for PAM-4 signaling.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:PPJ 0
:CALC1:MST:EYE:PAM4:EYE1:PPJ?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:RMSJitter[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:RMSJitter[:STATe]?
Description
The command sets the 'eye RMS jitter' display state to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling. This corresponds to the RMS Jitter selection on the TIME SETUP menu.
The query outputs the 'eye RMS jitter' display state for the active trace of the indicated channel for the indicated eye for PAM-4 signaling.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:RMSJ 0
:CALC1:MST:EYE:PAM4:EYE1:RMSJ?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:RTIMe[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:RTIMe[:STATe]?
Description
The command sets the 'eye rise time' display state to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling. This corresponds to the Rise Time selection on the TIME SETUP menu.
The query outputs the 'eye rise time' display state for the active trace of the indicated channel for the indicated eye for PAM-4 signaling.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:RTIM 0
:CALC1:MST:EYE:PAM4:EYE1:RTIM?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:SNRatio[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:SNRatio[:STATe]?
Description
The command sets the 'eye signal to noise' display state to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling. This corresponds to the Signal to Noise selection on the AMPLITUDE SETUP menu.
The query outputs the 'eye signal to noise' display state for the active trace of the indicated channel for the indicated eye for PAM-4 signaling.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:SNR 0
:CALC1:MST:EYE:PAM4:EYE1:SNR?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:TRELated[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:TRELated[:STATe]?
Description
The command sets the display ON/OFF of the time-related eye statistics for the given trace of the indicated channel for PAM-4 signaling.
The query outputs the display state of the time-related eye statistics for the given trace of the indicated channel for the indicated eye for PAM-4 signaling.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MST:EYE:PAM4:TREL 1
:CALC1:MST:EYE:PAM4:TREL?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:WIDth[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:WIDth[:STATe]?
Description
The command sets the 'eye width' display state to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling. This corresponds to the Width selection on the TIME SETUP menu.
The query outputs the 'eye width' display state for the active trace of the indicated channel for PAM-4 signaling.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:WID 0
:CALC1:MST:EYE:PAM4:EYE1:WID?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:LLEVel[:STATe] <char>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PAM4:EYE{1-3}:LLEVel[:STATe]?
Description
The command sets the low-level display state to ON/OFF for the active trace of the indicated channel for the indicated eye for PAM-4 signaling. This corresponds to the ‘0’ Level selection on the AMPLITUDE SETUP menu.
The query outputs the low-level display state for the active trace of the indicated channel for the indicated eye for PAM-4 signaling.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
NA
Query Output
<char> 1 | 0
Range
NA
Default Value
1
Syntax Example
:CALC1:MST:EYE:PAM4:EYE1:LLEV 0
:CALC1:MST:EYE:PAM4:EYE1:LLEV?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PERCentage:HIGH <int>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PERCentage:HIGH?
Description
The command sets the rise/fall time definition high percentage value for the active trace of the indicated channel.
The query outputs the rise/fall time definition high percentage value for the active trace of the indicated channel.
Cmd Parameters
<int> 51 to 99
Query Parameters
NA
Query Output
<int> 51 to 99
Range
51 to 99
Default Value
90%
Syntax Example
:CALC1:MST:EYE:PERC:HIGH 75
:CALC1:MST:EYE:PERC:HIGH?
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PERCentage:LOW <int>
:CALCulate{1-16}[:SELected]:MSTatistics:EYE:PERCentage:LOW?
Description
The command sets the rise/fall time definition low percentage value for the active trace of the indicated channel.
The query outputs the rise/fall time definition low percentage value for the active trace of the indicated channel.
Cmd Parameters
<int> 1 to 49
Query Parameters
NA
Query Output
<int> 1 to 49
Range
1 to 49
Default Value
10%
Syntax Example
:CALC1:MST:EYE:PERC:LOW 25
:CALC1:MST:EYE:PERC:LOW?