:SENSe{1-16}:CORRection:COLLect:BBCal Subsystem
The :SENSe{1-16}:CORRection:COLLect:BBCal subsystem command sets the breakpoint frequency for Broadband calibration method.
Calibration Subsystems with Actual Calibration
Related calibration subsystems that perform actual calibrations are:
:SENSe{1-16}:CORRection:COLLect:BBCal:PORT{1-4}:FREQuency:BREakpoint <NRf>
:SENSe{1-16}:CORRection:COLLect:BBCal:PORT{1-4}:FREQuency:BREakpoint?
Description
The command sets the breakpoint frequency for Broadband calibration method on the indicated channel depending on the port setting:
PORT1 = Port 1 for a 1-port cal; CalA for a 2-port, 3-port, or 4-port cal
PORT2 = Port 2 for a 1-port cal; CalB for a 2-port, 3-port, or 4-port cal
PORT3 = Port 3 for a 1-port cal
PORT4 = Port 4 for a 1-port cal
The query outputs the breakpoint frequency for Broadband calibration method on the indicated channel for the indicated port setting.
Cmd Parameters
<NRf> The input parameter is in Hertz.
Query Parameters
NA
Query Output
<NR3> The output is in Hertz.
Range
NA
Default Value
67E9
Syntax Example
:SENS1:CORR:COLL:BBC:PORT1:FREQ:BRE 67E9
:SENS1:CORR:COLL:BBC:PORT1:FREQ:BRE?