VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :SENSe{1-16}:SOURce{1-4} Subsystem
 
:SENSe{1-16}:SOURce{1-4} Subsystem
The :SENSe{1-16}:SOURce{1-4} subsystem commands are used to configure and control external sources.
Trigger, Hold, and External Source Subsystems
Related trigger, hold, and external source subsystems are:
• :SENSe:HOLD Subsystem
• :SENSe{1-16}:HOLD Subsystem
• :SENSe{1-16}:OFFSet and :OFFset{1-50} Subsystem
• :SENSe{1-16}:SOURce{1-4} Subsystem
• :SOURce:ALL:EXTernal Subsystem
• :SOURce{1-4}:EXTernal Subsystem
• :TRIGger[:SEQuence] Subsystem
:SENSe{1-16}:SOURce{1-4}:EXTernal[:STATe] <char>
:SENSe{1-16}:SOURce{1-4}:EXTernal[:STATe]?
Description
Turns on/off the control of the indicated external source on the indicated channel. Requires from one to four external sources. Note that the command does not disable the RF output of the external source. Outputs the on/off status of control of the indicated external source on the indicated channel. Requires from one to four external sources.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:SENS1:SOUR1:EXT ON
:SENS1:SOUR1:EXT?