Press the Marker main menu key to display the Marker menu.
Selecting, Activating, and Placing a Marker
1. Press the Marker 1 2 3 4 5 6 submenu key and then select the desired marker using the touch screen marker buttons. The selected marker is underlined on the Marker submenu key.
2. Press the On Off submenu key so that On is underlined. The selected marker is displayed in red and ready to be moved.
3. Markers can be moved by touching the desired location on the screen, or by using the Arrow keys.
4. Repeat Step 1 through Step 3 to activate and move additional markers.
Selecting, Activating, and Placing a Delta Marker:
1. Press the Marker 1 2 3 4 5 6 submenu key and select the desired marker (to become a delta marker). The selected marker is underlined.
2. Press the Delta On Off submenu key so that On is underlined. The selected marker is displayed in red and ready to be moved.
3. Touch the screen or use the Arrow keys to move the delta marker to the desired feature.
4. Repeat Step 1 through Step 3 to activate and move additional delta markers.
Viewing Marker Data in a Table Format
The marker table is available only for Distance‑to‑PIM measurements. It is not available for PIM vs. TIME, Noise Floor, or Swept PIM. To view the table:
• Press the Marker Table submenu key so that On is underlined. All marker and delta marker data are displayed in a table under the measurement graph.
Saving Measurements
1. Press the Save Measurement submenu key on the Measurements menu.
2. Press the Change Save Location submenu key and set the current location to be the USB flash drive or internal memory, and then press Set Location.
3. Press Change Type (Setup/JPG/…).
4. Press the JPEG Capture submenu key (to select Full or Graph Only), if desired. Then press Enter.
5. Enter the file name using the touch keyboard (and Quick Name Matrix, if desired) and press Enter (touch screen or hard key).
Note
After the Save Location and File Type are changed, these settings will remain in effect until manually changed again.