 | Step Size Press this submenu key to set the frequency step size. Intermod Order Select the 3rd, 5th or 7th order of intermodulation. The Anritsu PIM Master automatically sets the center frequency based on the new intermod setting. This submenu key is not displayed when using Option 902. 2-Port Low Band Selects the 2-Port mode when On and hides the Band Select key from view. Band Select High Low This key is visible in 1-port mode (2-Port Low Band Off). Press this submenu key to toggle the band selection to High or Low. This submenu key appears only on instruments with multiple receive ranges (see buttons below menu at left). For Option 194, the toggle choices are PCS and PCS/AWS. For Option 600, the toggle choices are 1900 MHz and 600 MHz. For Option 902, the toggle choices are IM2 and GSM. Swept PIM Aid Press this submenu key to display the Swept PIM Parameters dialog box. F1, F2, and IMD3 ranges are displayed. Start and Stop frequencies can be set for F1 Sweep and F2 Sweep. See Figure: Swept PIM Parameters Dialog Box. |
