The PIM Master can be operated while in the soft carrying case by opening the front flap (secured by two zippers).
Case Open to Operate the PIM Master
The case is padded on all sides and contains protective inserts in the front and back panels. An additional flap at the top of the rear panel can be folded over the PIM Master top connector panel for additional protection.
To install the instrument into the soft carrying case:
1. The Back panel of the case is secured with two zippers that start at the bottom of each side. Fully close the front panel of the case to help support the shape of the case while you are inserting the PIM Master into the back.
2. Place the soft carrying case face down on a stable surface, with the front panel fully closed and laying flat.
3. Open the zippered back of the case.
4. Insert the instrument face down into the case, taking care that the connectors are properly situated in the case top opening. Refer to the tilting of the instrument as shown in Figure: Putting PIM Master into Soft Case. Note that the instrument in this figure may differ from your model. The method of insertion remains the same.
Putting PIM Master into Soft Case
5. Close the back panel and secure with one or both zippers to securely enclose the PIM Master.
6. Two pairs of additional straps cross over the top of the PIM Master (inside the strap brackets) to keep the soft case closed securely around the instrument. These straps have hook‑and‑loop fasteners. See Figure: Instrument Enclosed in the Soft Carrying Case.
7. An additional flap (sewn to the back cover) with a protective insert can be folded over the center of the top connector panel. It attaches to the front of the case by hook‑and‑loop fasteners. This flap is shown closed in Figure: Access to Side Panel.
A side flap provides access to the side panel. Inside and below the panel is a pocket to hold a wireless router. The router connecting cables can be enclosed by the side flap.
