Remote Spectrum Monitors : MS27101A Installation : Single Unit Rack Mounting
 
Single Unit Rack Mounting
This section explains how to fit a single MS27101A monitor into an instrument rack using the two single mounting brackets.
1. Prepare the MS27101A by removing the front panel handles as shown in Figure: Preparing the MS27101A for Single Unit Rack Mounting. Retain the screws.
Preparing the MS27101A for Single Unit Rack Mounting
2. Slide the two mounting brackets into the aluminum extrusions as shown in Figure: Installing the MS27101A Mounting Brackets (1), then reinstall the front panel handles (2 and 3) using the same screws that were removed in Step 1.
Installing the MS27101A Mounting Brackets
3. Install finished assembly into the rack mount per the cabinet manufacturers instructions.