Remote Spectrum Monitors
:
Setting Up Windows 7 for Dynamic IP
Setting Up Windows 7 for Dynamic IP
1.
Select the Local Area Connection link as shown in
Figure: Select the Local Area Connection link
.
Select the Local Area Connection link
2.
Select
Properties
as shown in
Figure: Windows configuration steps
a.
3.
Highlight
Internet Protocol Version 4 (TCP/IPv4)
and select
Properties
as shown in
Figure: Windows configuration steps
b.
4.
Change the properties to match the illustration as shown in
Figure: Windows configuration steps
c as listed below:
•
Obtain an IP address automatically
•
Obtain DNS server address automatically
Windows configuration steps
