Vision™ MX280001A Spectrum Monitoring Application Software : AM/FM Measurements (Option 479) : Introduction : Remote Probe Configuration
 
Remote Probe Configuration
The AM/FM Measurements – Remote Probe Configuration section provides the menu shown in Figure: Remote Probe Configuration.
Remote Probe Configuration
 
The Remote Probe Configuration buttons are described in Table: Remote Probe Configuration.
Remote Probe Configuration
Icon
Description
Host name
Type the host name of IP address of the remote probe you want to use.
Frequency
Type the carrier frequency at which to capture data.
Snapshot
Type the antenna port on the remote probe. You can select 1 to 24.
Stream Audio
Stream audio from a selected source.
 
Sweep Trace
Provides a sweep display graph of the audio streaming.