Vision™ MX280001A Spectrum Monitoring Application Software : Create a Database : Introduction : Open the Probe Simulator Program
 
Open the Probe Simulator Program
The Probe Simulator program must be running for many of the exercise examples in this chapter. Do not close the probe simulator program while measurements and exercises are in process. Refer to the Vision system files that have been downloaded from Vision Application Installation.
Probe Simulator Program
1. Locate the Probe Simulator Program from the your Start menu or file folder. Depending on your version of Windows, the program may be located in the Vision Tools folder.
2. Open the Probe Simulator Program.
Once opened, a console will appear with data. The Vision Probe Simulator will appear as shown in Figure: Vision Probe Simulator Console.
Vision Probe Simulator Console
Note 
Do not close the Vision Probe Simulator program. It can be minimized from your monitor screen but it must be running in the background to capture remote monitoring measurement data.