Known transmitter details can be identified by selecting the signal spectrum on the Spectrum Monitor Screen. From the Trace Monitor screen, click the Transmitter Menu Button to display the Known Transmitter menu. Refer to Figure: Transmitter Menu Button to locate the Transmitter Menu.
Vision Trace Monitor User Interface
1. Highlighted Spectrum Monitor Probe
2. Transmitter Line Color Selected (Orange)
3. Show Transmission Location Horizontal Line
4. Orange Transmitter Signal Frequency Location on Spectrum
5. Known Transmitter Details Pop Up
6. Blue Balloon – Transmitter Signal Frequency Map Location
7. Three-Dot-Menu
Loading the Known Transmitter (.lst) File
A user created list of known transmitters is required to be loaded first before they will be available to display. To load the file of the known transmitter signal:
1. Click the Spectrum Monitor Probe from the top left side of the Spectrum Monitor Screen.
4. Click the list file (.lst) from your stored location.
Show Transmitter Locations
1. From the pull down menu shown in Figure: Load From File, click Show Transmitter Locations.
• This will show a horizontal white bar across the Spectrum Monitor Screen. The distance the white bar is pulled down will determine the length of the transmitter signal-identifier.
2. Click to open the Load From File menu and locate the transmission file that you want to locate.
3. Click the .lst file and you will see the Transmitter Signal Frequency appear as a vertical line in the Spectrum Display Screen as shown in item (4) of Figure: Vision Trace Monitor User Interface. The color of the Transmitter Signal Frequency is determined by the color selection chosen from the Transmission Line Color menu. This example shows that Orange has been previously selected.
