Vision™ MX280001A Spectrum Monitoring Application Software : File Viewer : Outdoor Frequency Coverage Mapping Example
 
Outdoor Frequency Coverage Mapping Example
Use the following steps to configure a typical measurement setup for an outdoor GPS-assisted, multi-frequency coverage mapping. Option 407 (High-Speed Port Scanner) and 486 (Coverage Mapping) are required.
1. Connect the target receiver to a 12V DC power supply, such as a car’s 12V accessory plug.
2. Connect the GPS antenna.
3. Establish an IP connection between the target receiver unit and your laptop.
4. Start the Vision Option 407 High-Speed Port Scanner software on your laptop.
5. Configure the measurement setup. See High-Speed Port Scanner (Option 407).
6. Start driving and use the multi-screen capability to display all measured frequencies at the same time.
7. Display the measurement results afterwards and create your report.
Figure: Typical Option 407 High-Speed Port Scanner Frequency Setup shows a typical setup for a measurement of the down-link channels of several LTE 800 MHz cellular systems and several TETRA systems. Adapt the settings to your needs and save your setup.
Typical Option 407 High-Speed Port Scanner Frequency Setup