Field Master Pro™ MS2090A User Guide : LTE Measurements : LTE Measurement Setup
 
LTE Measurement Setup
LTE base station validation qualifies the performance of both FDD and TDD gNB base stations with essential measurements that are in full compliance with 3GPP. The LTE analyzer features smart measurements that make configuring these measurements and views for LTE compliance testing easy:
• LTE demod summary measurements:
• Frequency Error
• Time Offset
• Cell, Sector and Group ID
• Modulation Quality
• Primary/Secondary Synchronization Signal (PSS/SSS) Status
• Primary Broadcast Channel (PBCH) Power
• Synchronization Signal (SS) Power
• Reference Signal (RS) Power
• Multiple Input Multiple Output Antenna Power (Four Antennas)
• Time Alignment Error between MIMO Antenna Pairs
• Resource Block Utilization and OSTP
• LTE Multi PCI demod summary measurements
• Channel Power (CP)
• Channel Spectrum (Occupied Bandwidth)
• Carrier Aggregation
• Control Channel
• Constellation
• Frame Power vs. Time
MEASURE Menu (LTE)
 
LTE MEASURE Menu
-
 
MEASUREMENT
Selects the desired measurement type from the following list:
• LTE Demod Summary: Displays the current beam measurement status in a quick-view summary that includes the PCI and received power measurement summaries. See LTE Demod Summary and Multi PCI.
• LTE Multi PCI: Displays the current beam measurement status in a quick-view summary that includes the PCI and received power measurement summaries. See LTE Multi PCI.
• Channel Power: Provides an RF channel power measurement that includes the total channel power, power spectral density (PSD), and pass/fail compliance testing. See LTE Channel Power.
• Channel Spectrum: Provides an RF occupied bandwidth measurement that includes the occupied bandwidth, total power, and pass/fail compliance testing. See LTE Channel Spectrum.
• Carrier Aggregation: Provides a component carrier measurement that includes the PCI, reference signal power, EVM, and Frequency error measurement summaries. See LTE Carrier Aggregation.
• Control Channel: Provides a component carrier measurement that includes the PCI, reference signal power, EVM, and frequency error measurement summaries. See LTE Control Channel.
• Constellation: Provides a constellation measurement that includes the PCI summary, reference signal power, EVM, and frequency error measurement summaries. See LTE Constellation.
• Frame Power: Provides a frame power summary measurement that includes the PCI summary, total frame, sub-frame, and slot power measurements. See LTE Frame Power.
VIEW
When the measurement is Demod Summary, you can select the type of view:
SETUP
Opens one of the measurement SETUP menus. The LTE SETUP menus can be access directly via the SETUP or MEASURE menus after the desired measurement has been selected. The setup menu depends on the current measurement and view selected.