Field Master Pro™ MS2090A Programming Manual : Programming with SCPI
 
Programming with SCPI
 
Scope of Manual
Additional Documentation
Introduction
Remote Programming Setup and Interface
Network Interface Connection and Setup
USBTMC Interface Connection and Setup
Sending SCPI Commands with NI-VISA
SCPI Command Overview
Command Names
Command Syntax
Data Parameters
Spectrum Trace Data Format
Unit Suffixes
Query Commands
Hierarchical Command Structure
SCPI Command Types
SCPI Common Commands
*CLS
*IDN?
*RST
SCPI Required Commands
SCPI Optional Commands
Status System Reporting
Status Group Registers
Status Group Reporting
SCPI Commands
SCPI Command Programming Examples
Notational Examples
Spectrum Trace Data via SCPI
C/C++
IQ Capture Programming Examples
Scope of Manual
This manual provides SCPI programming information and a list of SCPI programming commands for the Anritsu MS2090A Field Master Pro™ Spectrum Analyzer.
Additional Documentation
Document Part Number
Description
10100-00069
Important Product Information, Compliance, and Safety Notices
11410-01000
MS2090A Field Master Pro Technical Data Sheet
10580-00444
MS2090A Field Master Pro User Guide
Updates, if any, can be downloaded from the Library tab on the Anritsu product page:
https://www.anritsu.com/en-us/test-measurement/products/ms2090a
Introduction
This chapter provides an introduction to Standard Commands for Programming Instruments (SCPI). The SCPI standard defines a set of programming commands and standards for use by all SCPI compatible instruments. SCPI is intended to provide a consistent environment for program development. It does so by defining standardized controller messages, instrument responses, and message formats for all SCPI compatible instruments. The following sections include descriptions of the command types, hierarchical command structure, command subsystems, data parameters, and notational conventions with examples.