AeroShield™ MX280002A RF Drone Detection and Tracking Software : Drone Tracking User Interface : Create a Drone Tracking User-Control Application : Load the Configuration File
 
Load the Configuration File
1. Click Open from the AeroShield API software toolbar.
2. Click Users from the Local Drive (C:).
3. Click Documents.
4. Find and click to open the Configuration file (.adt) file as shown in Figure: AeroShield API Software GUI Example.
 
Open Configuration File 24.adt
The Drone Tracking GUI opens positioned on the map screen as shown in Figure: AeroShield API Software GUI Example. The top left panel lists a maximum of 24 RSMs and their corresponding blue markers on the map screen. The Trace window displays the RF signals with a mask applied to capture signals that violate the mask threshold. The top middle screen captures the tracking events. Each tracking event is initiated from the start of detection and terminates at the end of the signal detection. The bottom middle window logs each event as it occurs, typically every few seconds.
Note the red markers on the map that represent the RSMs performing TDOA positioning of the drone path. The approximate drone location is marked with the red circular bullseye. For a comprehensive description of the GUI displayed, see Drone Detection and Tracking User Interface.
AeroShield API Software GUI Example