The simulator Source 1 and Source 2 tracking event log displays the sequential coordinate location (tracks) of the interferer signal. Two interferer tracks can be active simultaneously. Either Source 1 or Source 2 can be enabled or disabled. Each Source can be set to moving or stationary. Click a coordinate within a source column will gray the other source column as shown in Figure: Tracking Two Source Tracks.

Click the Source 1 and/or Source 2 check box to display the flight path track points corresponding source interferer on the map. Uncheck removes the source tracks from the map, but the tracking continues to be monitored in the tracking list window.

Click the Mobile check box mobilizes the signal on the map. Uncheck keeps the signal stationary on the map.