Create an RSM TDOA layout on the Simulator map to track the drone flight activity. A minimum of three RSMs should be added to the map in order to triangulate, monitor, and capture a drone flight path. Figure: Add RSM Coordinates shows a basic Simulator screen.
Add RSM Coordinates
1. GPS Coordinates Column
2. Measure the Distance
3. Distance Readout (Meters)
GPS Coordinate Column
At least three RSM must be added to the map. The corresponding RSM coordinates are then copied into this column by the user. A maximum of 24 RSM coordinates can be added.
Measure the Distance
Click on the map and drag the mouse pointer across the map as a distance scale. To provide a good TDAOA capture range, the distance between each RSM should be between 500 to 700 meters.
Distance Readout
The distance measured can be viewed at the bottom of the map. Vary the distance between the mouse pointer’s start and stop position until a desired distance is obtained.
