MX280005A Vector Signal Analysis Software Help : Measurement Ranges and Settings : Introduction : Setting Capture Time
 
Setting Capture Time
This mode specifies the capture time for each measurement. Sets the capture mode from Capture Time and the capture time length from Capture Time Length. The Capture Time Length setting range changes according to the Span. The Span is determined by the Symbol Rate See Table: Maximum Capture Time.
Maximum Capture Time
Span
Maximum Capture Time (s)
1 kHz
2000
2.5 kHz
2000
5 kHz
2000
10 kHz
2000
25 kHz
2000
50 kHz
1000
100 kHz
500
250 kHz
200
500 kHz
100
1 MHz
50
2.5 MHz
20
5 MHz
10
10 MHz
5
25 MHz
2
31.25 MHz
2
50 MHz
0.5
62.5 MHz
0.5
100 MHz
0.5
125 MHz
0.5