Day/Month/Year of the captured data in the DD/MM/YYYY format.

Data captured time in HH/MM/SS format.

Data file name

Data format, fixed to Float

Number of samples of the recorded data (Sample).

Error status of the recorded data
Normal: No error
OverLoad: Level over

Trigger occurrence position (Sample). The start point of the recorded data is 0.

Center frequency (Hz)

Frequency span (Hz)

Sampling rate (Hz)

Frequency band switch mode
Normal: Normal mode
Spurious: Spurious mode

Reference level (dBm)

Attenuator value (dB)

Internal gain value (dB). This is an internal parameter.

Gain value obtained by PreAmp (dB)

IQ reverse setting, fixed to Normal

Trigger On/Off setting
FreeRun: Trigger is not used
Triggered: Trigger is used

Trigger source
External: External trigger
SGMarker: SG marker trigger

Trigger level (dBm) This value does not include the reference level offset. It is in dBm units, even if the scale mode is Lin.

Trigger delay time (s) It is the relative time from the trigger input position to the start point of the recorded data.

Reference IQ amplitude value that indicates 0 dB.
Fixed to 1.

Reference signal information
Ref.Int: Internal reference signal
Ref.Ext: External reference signal
Ref.Int Unlock: Internal reference signal is unlocked.
Ref.Ext Unlock: External reference signal is unlocked.

Correction value of correction function (dB) The correction factor is added to the IQ data in a data file. 0.000 is automatically set when the Correction function is set to Off.

Signal input terminal RF: RF terminal

0-second reference position Indicates the 0-second reference position using the digitized data point position. During Replay function execution, the reference position is displayed as 0 s.

Selects the edge where the trigger is generated (rise or fall).
Rise: Rising edge
Fall: Falling edge