Sets the file path of the indicated calibration file needed to hybridize for the indicated port or port-pair on the indicated channel. Outputs the file path of the calibration file needed to hybridize for the indicated port or port-pair on the indicated channel.

<string> Filename and path in the form: 'x:\directory\filename.xxx', where
x:\directory must exist. See Programming the VectorStar Series VNA, Notational Conventions for more information.

<string> Filename and path in the form: 'x:\directory\filename.xxx'.

NA

NA

Begins a Hybrid FULL4 port calibration using four FULL1 calibrations on all ports and the channel indicated. No query. To query the state of this command use:

NA

NA

NA

NA

The command adds one or more Transmission Throughs (Thrus) to the Hybrid Calibration process on the indicated channel where:

The use of THRus connected to Port 3 and/or Port 4 require a 4-port VNA instrument. At least one THRu must be defined. Up to 6 THRus can be defined. The query outputs the Hybrid calibration process list of Transmission Thrus on the indicated channel.

<char> THRu12 | THRu13 | THRu14 | THRu23 | THRu24 | THRu34

<char> THR12 | THR13 | THR14 | THR23 | THR24 | THR34

NA

NA

Begins a Hybrid FULL2 calibration using two FULL1 calibrations on the indicated port pair and channel. No query. To query the state of this command use:

There are six possible FULL2 port-pair combinations available on a 4-port VNA instrument:

Prepare for this command by specifying the Full2 calibration file name for each port. For example, if Port Pair 2-4 is to be calibrated on channel 3, issue the two commands as:

Use filename1 for the first number in the pair and use filename2 for the second number in the pair.

No query.

<char> 12 | 13 | 14 | 23 | 24 | 34

NA

NA

NA

Sets the calibration line selection for hybrid cal on the selected port-pair of the indicated channel.

The query outputs the line selection for hybrid cal on the selected port-pair of the indicated channel.

<char1> THRu | RECiprocal | S2PThru

NA

<char1> THR | REC | S2PT

NA

THR

The command loads an s2p file for thru in hybrid cal and saves the loaded file in the default location: 'C\AnritsuVNA\Data\S2PThruCal'.

The query outputs the loaded s2p file path.

<string> Filename and path in the form: 'x:\directory\filename.s2p' where
x:\directory\filename.s2p must exist. See Programming the VectorStar Series VNA, Notational Conventions for more information.

NA

<char1> Filename and path in the form: x:\directory\filename.s2p

NA

NA

Begins a Hybrid FULL3 calibration using three FULL1 calibrations on the triport and channel indicated. No query. To query the state of this command use:

There are four possible FULL3 port triplet variations available on a 4-Port Test Set:

Prepare for this command by specifying the Full1 (Full One) calibration file name for each port. For example, if port triplet 123 is to be calibrated on Channel 4, issue the three commands as:

Use FILe1 for the first number in the port triplet set, use FILe2 for the second number in the port triplet set, and FILe3 for the third number in the port triplet set.

<char> 123 | 124 | 134 | 234

NA

NA

NA

Begins a Hybrid FULL4 calibration using two FULL2 calibrations on the port pair and channel indicated. No query. To query the state of this command use:

There are six possible FULL2 port pair combinations available on a 4-Port Test Set:

Prepare for this command by specifying the Full2 calibration file name for each port. For example, if Ports 1-3 and Ports 2-4 are to be calibrated on Channel 1, issue the two commands as:

Use FILe1 for the first port pair Port 1-3 and use FILe2 for the second port pair Port2-4.

<char> 12 | 13 | 14 | 23 | 24 | 34

NA

NA

NA

Initiates collection of the through standard data for the Hybrid Calibration on the indicated port pair and channel. No query. There are six possible port pair combinations:

<char> 12 | 13 | 14 | 23 | 24 | 34

NA

NA

NA

The command sets the thru-line use reciprocal flag on the selected port-pair of the indicated channel.

The query outputs the thru-line use reciprocal flag on the selected port-pair of the indicated channel.

<char> ON | OFF | 1 | 0

NA

NA

0