VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide Subsystem
 
:SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide Subsystem
The :SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide subsystem commands provide control of the waveguide Line-Reflect-Line parameters for dielectric and cutoff frequency values.
LRL Calibration Subsystems
The LRL-related calibration commands are organized into five (5) subsystems in the following sections:
• :SENSe{1-16}:CORRection:COLLect:LRL:CALB Subsystem
• :SENSe{1-16}:CORRection:COLLect:LRL:DEVice{1-10} Subsystem
• :SENSe{1-16}:CORRection:COLLect:LRL:PORT Subsystem – 4-Port VNAs
• :SENSe{1-16}:CORRection:COLLect:LRL:SINGleton Subsystem – 4-Port VNAs
• :SENSe{1-16}:CORRection:COLLect:LRL[:CALa] Subsystem (this subsystem)
:SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide:DIELectric <NRf>
:SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide:DIELectric?
Description
Sets the LRL waveguide calibration dielectric for the indicated channel. Outputs the LRL waveguide calibration dielectric for the indicated channel.
Cmd Parameters
<NRf>
Query Parameters
NA
Output
<NR3>
Range
MPND
Default
NA
Syntax Example
:SENS1:CORR:COLL:LRL:WAV:DIEL <NRf>
:SENS1:CORR:COLL:LRL:WAV:DIEL?
:SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide:FREQuency <NRf>
:SENSe{1-16}:CORRection:COLLect:LRL:WAVeguide:FREQuency?
Description
The command sets the LRL waveguide calibration cutoff frequency for the indicated channel. Outputs the LRL waveguide calibration dielectric for the indicated channel.
Cmd Parameters
<NRf>
Query Parameters
NA
Output
<NR3>
Range
MPND
Default
NA
Syntax Example
:SENS1:CORR:COLL:LRL:WAV:FREQ <NRf>
:SENS1:CORR:COLL:LRL:WAV:FREQ?