PIM Master™ Passive Intermodulation Analyzer with Site Master™ Cable & Antenna Analyzer (331) and 2-Port Options (703)User Guide : General Information : ­Instrument Description
 
­Instrument Description
Anritsu developed the PIM Master, with Site Master and 2-Port LTE options, to fully characterize the RF performance of transmission systems with a single test instrument. Previously, two separate analyzers were required to measure Passive Intermodulation (PIM) and impedance mismatches in RF transmission lines. With Site Master Option 331 installed, the PIM Master can now perform both tests to ensure minimum signal degradation, minimum noise generation, and maximum signal throughput. Capabilities with Option 331 installed include:
• PIM vs. TIME
• Swept PIM
• Noise Floor
• Distance‑to‑PIM
• Return Loss
• VSWR
• Cable Loss
• Distance‑to‑Fault (DTF)
PIM Master Options
Table: PIM Master Options lists the current available options. Refer to the Anritsu web site for the latest information on available PIM Master options and frequency ranges.
PIM Master Options
Instrument Option
Description
MW82119B‑0600
LTE 600 MHz with 1900 MHz
MW82119B‑0700
LTE 700 MHz
MW82119B‑0701
APT 700 MHz
MW82119B‑0703
2-Port LTE 700MHz
MW82119B‑0800
LTE 800 MHz
MW82119B‑0850
Cellular 850 MHz
MW82119B‑0900
E‑GSM 900 MHz
MW82119B‑0902
E‑GSM 900 MHz with IM2
MW82119B‑0180
DCS 1800 MHz
MW82119B‑0194
PCS/AWS 1900/2100 MHz
MW82119B‑0210
UMTS 2100 MHz
MW82119B‑0260
LTE 2600 MHz
MW82119B‑0331
Site Master Cable and Antenna Analyzer
MW82119B‑0031
GPS Receiver (requires antenna)
MW82119B‑0019
High Accuracy Power Meter (requires sensor)
MW82119B‑0098
Standard Calibration Certification
MW82119B‑0099
Premium Calibration Certification
Note 
For ordering information and for option and accessory part numbers, refer to the technical data sheet (listed in Other Documents).