Vision™ MX280001A Spectrum Monitoring Application Software : Geo-Location Techniques : TDOA Settings & Control
 
TDOA Settings & Control
To use TDOA, confirm the target receivers are installed with the TDOA option and need to be a part of the Vision database. Click the Location Finder button as shown in Figure: Spectrum Monitor List and Location Finder Button.
Spectrum Monitor List and Location Finder Button
Pro
1. Select a channel of a probe of interest from the Probe List.
2. Click Location Finder from the main Vision Monitor toolbar.
• The Vision Source Locater Window will open. The trace data loads and accompanying geo-location map opens.
3. Click on any of the trace graphs to set the frequency of the interference source.
4. Refer to the TDOA Settings & Control panel as shown in Figure: TDOA Settings and Control. For further description of the TDOA Settings and Control panel, see TDOA Settings & Control.
TDOA Settings and Control