Vision™ MX280001A Spectrum Monitoring Application Software : Vision Trace Monitor (Option 400) : Setting up a Mask
 
Setting up a Mask
Create a Mask to monitor a signal’s limit line violations. To locate and create the Mask limits, refer to the red boxed area shown in Figure: Create Mask Block. The create a mask section consists of the elements in Table: Create a Mask
Create Mask Block
Create a Mask
Icon
Description
Mask Library List
Click from the list which mask format to view. The list of masks are created from the Mask Editor icon described below.
Mask Editor
Click opens the Mask Limit Line Editor screen. See Mask Limit Line Editor
Apply Mask
Click to apply the created mask. The Apply Mask To: dialog appears as shown below.
Depending on the limit line and trace type selected, some selections will be unavailable if a mask does not apply.
Current channel: 1 in Spectrum Monitor 2
Current basestation: Spectrum Monitor 2
All of channel 1 in group
All basestations in group
All of channel 1
All basestations
Click the Mask Editor Button: Refer to Mask Limit Line Editor.
Trace Mode Sub-menu
See Trace Mode.