Vision™ MX280001A Spectrum Monitoring Application Software : Vision Locate (Option 401) : Location Finder (Option 401) : Source Tracking
 
Source Tracking
The Vision Locator Source Tracking settings and control panel provides the menu selection shown in Figure: Source Tracking Control and Settings.
Source Tracking Control and Settings
The Source Tracking selection tabs are described in Table: Source Tracking Settings and Control Buttons.
Source Tracking Settings and Control Buttons
Icon
Description
Track
Toggle tracking mode (Breadcrumbs on map to track source location).
Create
Create tracks based on traces in the database.
New Tracks
Remove existing tracks and prepare for a new tracking measurement.
Load File
Load a saved tracking estimate.
Averaging Low
Set track averaging to Low. May increase resolution, but also increases path noise.
Averaging Medium
Set track averaging to Medium. Best setting under normal conditions. Gives a fairly smooth path, but some corners may be rounded.
Averaging High
Set tracking averaging to High. Very smooth path, will round corners and turns. Small detours will be lost.
Display Points
Click the Display Points check box to display the measurement points on the map.