Field Master Pro™ MS2090A User Guide : General Information
 
General Information
 
Introduction
Before You Begin
Additional Documentation
Document Conventions
Instrument Description
Available Models
Available Options
Instrument Care and Preventive Maintenance
Ventilation and Cooling
Connector Care
ESD Caution
Calibration and Verification
Contacting Anritsu for Sales and Service
Introduction
The MS2090A Field Master Pro User Guide is part of a set of manuals that cover all of the instrument functions and their use. This manual covers the instrument overview, system functions, and other common features, along with a brief guide to basic measurement concepts and setups. Most instrument operations are covered in specific chapters of this manual as listed below. Remote programming is covered in the programming manual. Additionally, the MS2090A Field Master Pro offers a remote PC software that replicates the instrument user interface on your PC screen and allows network connection to an instrument or the ability to recall data and perform on-screen measurement analysis without a connection to an instrument (refer to MS2090A PC Software).
Before You Begin
• Read the Field Master Pro MS2090A Information, Compliance, and Safety Guide (PN: 10100-00069) for important safety, legal, and regulatory notices before operating the equipment.
• Charge the instrument battery using the supplied battery charger until fully charged.
Note 
The instrument may reboot when the battery charge level is low and external power is removed.
• Review Instrument Description and Instrument Care and Preventive Maintenance.
• Instrument Overview provides information about the physical instrument, connectors, and other hardware interfaces.
• Spectrum Analyzer Measurements provides information on the software user interface, such as instrument settings, measurement features, and menu overviews, for the spectrum analyzer.
• Real-Time Spectrum Analyzer Measurements (Option 199) provides information on the software user interface, such as instrument settings, measurement features, and menu overviews, for the real-time spectrum analyzer.
• LTE Measurements provides information on the software user interface, such as instrument settings, measurement features, and menu overviews, for the LTE analyzer.
• 5GNR Measurements provides information on the software user interface, such as instrument settings, measurement features, and menu overviews, for the 5GNR analyzer.
• IQ Capture/Streaming (Option 124/126 and 125/127) provides information on the software user interface, such as instrument settings, measurement features, and menu overviews, for the 5GNR analyzer.
• EMF Meter Measurements (Option 445) provides information on the software user interface, such as instrument settings, measurement features, and menu overviews, for the 5GNR analyzer.
• Pulse Analyzer Measurements (Option 421) provides information on the software user interface, such as instrument settings, measurement features, and menu overviews, for the pulse analyzer.
Additional Documentation
Related Manuals
Document Part Number
Description
10100-00069
Important Product Information, Compliance, and Safety Notices
11410-01000
MS2090A Field Master Pro Technical Data Sheet
10580-00445
Programming Manual
For additional information and literature covering your product, visit the product page of your instrument and select the Library tab:
http://www.anritsu.com/en-US/test-measurement/products/ms2090a
Document Conventions
The following conventions are used throughout the MS2090A documentation set.
Instrument Identification
When identifying a frequency option for the MS2090A, that option number is appended after the model number; example: MS2090A‑0709.
User Interface
The MS2090A user interface consists of menus, buttons, toolbars, and dialog boxes.
User Interface Navigation
Elements in navigation paths are separated as follows: MARKER > PEAK SEARCH > NEXT PEAK.