Field Master Pro™ MS2090A User Guide : General Information : Instrument Description
 
Instrument Description
The MS2090A Field Master Pro is a synthesizer‑based handheld signal analyzer that provides quick and accurate measurement results. The instrument is designed for monitoring, measuring, and analyzing signal environments. Measurements can easily be made by using the main instrument functions: frequency, span, amplitude, and bandwidth. A 10.1" capacitive touchscreen enables fast, easy data entry.
Typical measurements include in‑band interference and transmit spectrum analysis, plus cell site and 802.11a/b/g interference testing. Options are available for RF, advanced demodulation, and over‑the‑air (OTA) measurement. A full range of marker capabilities (such as peak, center, and delta functions) are provided for faster, more comprehensive analysis of displayed signals. Upper and lower multi‑segmented limit lines are available to create quick, simple pass/fail measurements.
Time and date stamping of measurement data is automatic. The internal memory provides for the storage and recall of up to 1000 measurement setups and up to 1000 traces. Measurements and setups can be stored internally on the instrument or on a USB flash drive for later recall.
Note 
Not all after-market USB drives are compatible with Field Master Pro. The USB drive must contain a single partition using FAT32 format.
Available Models
Table: Field Master Pro Frequency Options lists the frequency options available with the MS2090A Field Master Pro.
Field Master Pro Frequency Options
Model
Frequency Range
MS2090A‑0709
Signal Analyzer, 9 kHz to 9 GHz
MS2090A‑0714
Signal Analyzer, 9 kHz to 14 GHz
MS2090A‑0720
Signal Analyzer, 9 kHz to 20 GHz
MS2090A‑0726
Signal Analyzer, 9 kHz to 26.5 GHz
MS2090A‑0732
Signal Analyzer, 9 kHz to 32 GHz
MS2090A‑0743
Signal Analyzer, 9 kHz to 43.5 GHz
MS2090A‑0754
Signal Analyzer, 9 kHz to 54 GHz
Available Options
Available options for the Field Master Pro are listed in Table: Available Options.
Available Options
Option1
Description
MS2090A‑0006
Remove Wi-Fi
MS2090A‑0024
Interference Finder
MS2090A‑0031
GPS Receiver (requires external GPS antenna)
MS2090A-0089
Zero Span IF Output
MS2090A-0090
Gated Sweep
MS2090A-0103
55 MHz Analysis Bandwidth
MS2090A-0104
110 MHz Analysis Bandwidth
MS2090A-0124
IQ Waveform Capture
MS2090A-0125
IQ Waveform Streaming (requires Option 124)
MS2090A-0126
IQ Waveform Capture (non export control)
MS2090A-0127
IQ Waveform Streaming (non export control, requires Option 126)
MS2090A-0128
Vector Signal Analysis Enabled (requires Option 124 or 126; use with MX280005A)
MS2090A-0421
Pulse Analyzer
MS2090A-0431
Coverage Mapping (requires GPS option MS2090A-0031)
MS2090A-0444
EMF Measurement (requires a compatible Anritsu isotropic antenna)
MS2090A-0445
EMF Meter Enabled (requires 2000-1985-R isotropic EMF probe)
MS2090A-0199
Real-Time Spectrum Analyzer
MS2090A-0883
LTE FDD/TDD Measurement (requires GPS option MS2090A-0031)
MS2090A-0888
5GNR Downlink Measurements (requires GPS option MS2090A-0031)
MS2090A‑xxxx-0097
Accredited Calibration to ISO17025 and ANSI/NCSL Z540-1.
Includes calibration certificate, test report, and uncertainty data.
MS2090A‑xxxx-0098
Standard Calibration to ISO17025 and ANSI/NCSL Z540-1.
Includes calibration certificate.
MS2090A‑xxxx-0099
Premium Calibration to ISO17025 and ANSI/NCSL Z540-1.
Includes calibration certificate, test report, and uncertainty data.
1 xxxx is the frequency option number of the instrument.