:CALCulate{1-16}[:SELected]:FORmat Subsystem
The :CALCulate{1-16}[:SELected]:FORmat subsystem command configures the display type for the active trace on a per-channel basis.
Trace Subsystems
Related trace subsystems are:
:CALCulate{1-16}[:SELected]:FORMat <char>
:CALCulate{1-16}[:SELected]:FORMat?
Description
The command selects the display format of the active trace on the indicated channel.
The query outputs the display format of the active trace on the indicated channel.
The available display types are:
• GDELay = Group Delay
• IMAGinar = Imaginary
• LINPHase = Linear Mag and Phase
• LOGPHase = Log Magnitude and Phase
• MLINear = Linear Magnitude
• MLOGarithmic = Log Magnitude
• PHASe = Phase
• PLINear = Linear Polar and Linear Phase
• PLINCOMPlex = Linear Polar and Real/Imaginary
• PLOGarithmic = Log Polar and Log Phase
• PLOGCOMPlex = Log Polar and Real/Imaginary
• PWRIn = Power In
• PWROut = Power Out
• REAL = Real
• REIMaginary = Real and Imaginary
• SADCOMPlex = Smith (G + jB) Admittance Real/Imaginary
• SADLINear = Smith (G + jB) Admittance Linear/Phase
• SADLOGarithmic = Smith (G + jB) Admittance Log/Phase
• SADMittance = Smith (G + jB) Admittance
• SADMLC = Smith (G + jB) Admittance L/C
• SCOMPlex = Smith (R + jX) Impedance Real/Imaginary
• SIMPLC = Smith (R + jX) Impedance L/C
• SLINear = Smith (R + jX) Impedance Linear/Phase
• SLOGarithmic = Smith (R + jX) Impedance Log/Phase
• SMITh = Smith (R + jX) Impedance
• SWR = SWR
• ZREAL = Impedance Real
• ZCOMPlex = Impedance Real and Imaginary
• ZIMAGinary = Impedance Imaginary
• ZMAGNitude = Impedance Magnitude
Cmd Parameters
<char> GDELay | IMAGinary | LINPHase | LOGPHase | MLINear | MLOGarithmic | PHASe | PLINear | PLINCOMPlex | PLOGarithmic | PLOGCOMPlex | PWRIn | PWROut | REAL | REIMaginary | SADCOMPlex | SADLINear | SADLOGarithmic | SADMittance | SADMLC | SCOMPlex | SIMPLC | SLINear | SLOGarithmic | SMITh | SWR | ZREAL | ZCOMPlex | ZIMAGinary | ZMAGNitude
Query Parameters
<char> GDEL | IMAG | LINPH | LOGPH | MLIN | GDEL | IMAG | LINPH | LOGPH | MLIN | MLOG | PHAS | PLIN | PLINCOMP | PLOG | PLOGCOMP | PWRI | PWRO | REAL | REIM | SADCOMP | SADLIN | SADLOG | SADM | SADMLC | SCOMP | SIMPLC | SLIN | SLOG | SMIT | SWR | ZREAL | ZCOMP | ZIMAG | ZMAGN
Range
NA
Default Value
SMIT
Syntax Example
:CALC1:FORM LOGPH
:CALC1:FORM?