VectorStar™ MS464xB Series Microwave Vector Network Analyzer Programming Manual : SCPI Commands : :CALCulate{1-16}[:SELected]:TRACE{1-16}:MARKer{1-12} Subsystem
 
:CALCulate{1-16}[:SELected]:TRACE{1-16}:MARKer{1-12} Subsystem
The :CALCulate{1-16}[:SELected]:TRACE{1-16}:MARKer{1-12} subsystem commands provide configuration and control for the indicated marker and indicated trace.
Trace Subsystems
Related trace subsystems are:
• :CALCulate{1-16}:PARameter and :PARameter{1-16} Subsystem
• :CALCulate{1-16}:PARameter{1-16}:FSIMulator Subsystem
• :CALCulate{1-16}:PARameter{1-16}:SELect Subsystem
• :CALCulate{1-16}:PARameter{1-16}:COUPling Subsystem
• :CALCulate{1-16}:POLar Subsystem
• :CALCulate{1-16}:PROCessing:ORDer Subsystem
• :CALCulate{1-16}[:SELected]:CONVersion Subsystem
• :CALCulate{1-16}[:SELected]:DATA Subsystem
• :CALCulate{1-16}[:SELected]:FORmat Subsystem
• :CALCulate{1-16}[:SELected]:MATH Subsystem
• :CALCulate{1-16}[:SELected]:MDATA Subsystem
• :CALCulate{1-16}[:SELected]:SMITh Subsystem
• :CALCulate{1-16}[:SELected]:SMOothing Subsystem
• :CALCulate{1-16}[:SELected]:TRACE{1-16}:MARKer{1-12} Subsystem
• :CALCulate{1-16}[:SELected]:TDATA Subsystem
• :DISPlay Subsystem
:CALCulate{1-16}:TRACe{1-16}:MARKer{1-12}:SEArch:RANGe <char>
:CALCulate{1-16}:TRACe{1-16}:MARKer{1-12}:SEArch:RANGe?
Description
The command sets the marker search range selection for the indicated channel, trace, and marker.
The query outputs the marker search range selection for the indicated channel, trace, and marker.
Cmd Parameters
<char> TRACe | RNG1 | RNG2 | …. | RNG20
Query Parameters
NA
Query Output
<char> TRAC | RNG1 | RNG2 | …. | RNG20
Range
NA
Default Value
TRACe
Syntax Example
:CALC1:TRAC1:MARK1:SEA:RANG RNG5
:CALC1:TRAC1:MARK1:SEA:RANG?
:CALCulate{1-16}[:SELected]:TRACe{1-16}:MARKer{1-12}:TSEArch:RELative <NRf>
:CALCulate{1-16}[:SELected]:TRACe{1-16}:MARKer{1-12}:TSEArch:RELative?
Description
The command sets the marker search relative target value for target searches on the indicated channel, trace, and marker.
The query outputs the marker search relative target value for target searches the indicated channel, trace, and marker.
See Table: Trace Parameters and Coefficients for a complete listing of trace graph types, default settings, and available ranges.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
NA
Query Output
<NR3> The output parameter depends on the display type.
Range
MPNF
Default Value
0.000000E+000
Syntax Example
:CALC1:TRAC1:MARK1:TSEA:REL 1E7
:CALC1:TRAC1:MARK1:TSEA:REL?
:CALCulate{1-16}[:SELected]:TRACe{1-16}:MARKer{1-12}:TSEArch:RELative:TYPE <char>
:CALCulate{1-16}[:SELected]:TRACe{1-16}:MARKer{1-12}:TSEArch:RELative:TYPE?
Description
The command sets the marker search relative to type for target searches on the indicated channel, trace, and marker.
The query outputs the marker search relative to type for target searches the indicated channel, trace, and marker.
Cmd Parameters
<char> MAXimum | MINimum | REFMarker
Query Parameters
NA
Query Output
<char> MAX | MIN | REFM
Range
NA
Default Value
MAX
Syntax Example
:CALC1:TRAC1:MARK1:TSEA:REL:TYPE MAX
:CALC1:TRAC1:MARK1:TSEA:REL:TYPE?
:CALCulate{1-16}[:SELected]:TRACe{1-16}:MARKer{1-12}:TSEArch:TOLerance <NRf>
:CALCulate{1-16}[:SELected]:TRACe{1-16}:MARKer{1-12}:TSEArch:TOLerance?
Description
The command sets the marker search target tolerance value for target searches on the indicated channel, trace, and marker.
The query outputs the marker search target tolerance value for target searches the indicated channel, trace, and marker.
See Table: Trace Parameters and Coefficients for a complete listing of trace graph types, default settings, and available ranges.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
NA
Query Output
<NR3> The output parameter depends on the display type.
Range
0 to MPNF (positive number)
Default Value
0.000000E+000
Syntax Example
:CALC1:TRAC1:MARK1:TSEA:TOL 1E7
:CALC1:TRAC1:MARK1:TSEA:TOL?
:CALCulate{1-16}[:SELected]:TRACe{1-16}:MARKer{1-12}:TSEArch:TYPE <char>
:CALCulate{1-16}[:SELected]:TRACe{1-16}:MARKer{1-12}:TSEArch:TYPE?
Description
The command sets the marker search type for target searches on the indicated channel, trace, and marker.
The query outputs the marker search type for target searches the indicated channel, trace, and marker.
Cmd Parameters
<char> ABSolute | RELative
Query Parameters
NA
Query Output
<char> ABS | REL
Range
NA
Default Value
ABS
Syntax Example
:CALC1:TRAC1:MARK1:TSEA:TYPE REL
:CALC1:TRAC1:MARK1:TSEA:TYPE?