Toggles all markers on/off on the active trace of the indicated channel.
No query.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:ALL ON
:CALCulate{1-16}[:SELected]:MARKer:MOVe:CENTer
Description
Moves the active marker range value to the stimulus center range on the active trace of the indicated channel.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:MOV:CENT
:CALCulate{1-16}[:SELected]:MARKer:MOVe:REFMarker
Description
Moves the active marker to the reference marker on the active trace of the indicated channel. The active marker cannot be a reference marker. The reference marker must be on.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:MOV:REFM
:CALCulate{1-16}[:SELected]:MARKer:MOVe:STARt
Description
Moves the active marker range value to the stimulus start range on the active trace of the indicated channel.
No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:MOV:STAR
:CALCulate{1-16}[:SELected]:MARKer:MOVe:STOP
Description
TMoves the active marker range value to the stimulus stop range on the active trace of the indicated channel. No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:MOV:STOP
:CALCulate{1-16}[:SELected]:MARKer:MPSEArch
Description
Performs a multiple peak search on the active trace of the indicated channel.
Returns the marker search bandwidth data of the active marker on the active trace of the indicated channel.
Query Parameters
<NR3>, <NR3>, <NR3>, <NR3>{,<NR3>} The command outputs four or five <NR3> data elements in the following sequence:
• First <NR3> – Bandwidth in Hertz.
• Second <NR3> – Center of marker search range in Hertz, Meters, or Seconds.
• Third <NR3> – Q which is a unitless number.
• Fourth <NR3> – Loss in dB.
• Fifth <NR3> – Optional. The Shape Factor which is a unitless number. This parameter is optional depending on if the Shape Function is turned on or off using the Shape command.
The command toggles on/off the marker search bandwidth calculation of the active marker on the active trace of the indicated channel. The query outputs the on/off status of marker search bandwidth calculation of the active marker on the active trace of the indicated channel.
The command sets the marker search define value for notch bandwidth calculation of the active marker on the active trace of the indicated channel. The query outputs the marker search define value for notch bandwidth calculation of the active marker on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
<NR3> The output parameter is in Hertz, Meters, or Seconds.
The command sets the marker search high value for notch shape factor calculation of the active marker on the active trace of the indicated channel. The query outputs the marker search high value for notch shape factor calculation of the active marker on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter depends on the display type.
Query Parameters
<NR3> The output parameter is in Hertz, Meters, or Seconds.
The command sets the marker search low value for notch shape factor calculation of the active marker on the active trace of the indicated channel. The query outputs the marker search low value for notch shape factor calculation of the active marker on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter depends on the display type.
The command toggles on/off the marker search notch shape factor calculation of the active marker on the active trace of the indicated channel. Outputs on/off status of marker search notch shape factor calculation of the active marker on the active trace of the indicated channel.
The command toggles on/off the marker search notch calculation of the active marker on the active trace of the indicated channel. The query outputs the on/off status of marker search notch calculation of the active marker on the active trace of the indicated channel.
The command sets the marker search range start position for the indicated channel and range. The x-axis domain will be based on the domain of the active trace.
The query outputs the marker search range start position for the indicated channel and range. The x-axis domain will be based on the domain of the active trace.
Cmd Parameters
<NRf> The input parameter is in Hertz, Meters, Seconds, dBm, or unit-less, based on the domain of the active trace.
Query Parameters
NA
Query Output
<NR3> The output is in Hertz, Meters, Seconds, dBm, or unit-less, based on the domain of the active trace.
The command sets the marker search range stop position for the indicated channel and range. The x-axis domain will be based on the domain of the active trace.
The query outputs the marker search range stop position for the indicated channel and range. The x-axis domain will be based on the domain of the active trace.
Cmd Parameters
<NRf> The input parameter is in Hertz, Meters, Seconds, dBm, or unit-less, based on the domain of the active trace.
Query Parameters
NA
Query Output
<NR3> The output is in Hertz, Meters, Seconds, dBm, or unit-less, based on the domain of the active trace.
Range
MPND
Default Value
0.00000000000E+000
Syntax Example
:CALC1:MARK:SEA:RANG1:STOP:X 2.5E9
:CALC1:MARK:SEA:RANG1:STOP:X?
:CALCulate{1-16}[:SELected]:MARKer:SEArch <char>
:CALCulate{1-16}[:SELected]:MARKer:SEArch?
Description
The command sets the marker search type for the active marker on the active trace of the indicated channel. The query outputs the marker search type for the active marker on the active trace of the indicated channel.
The command toggles on/off applying the marker search range to all traces of the indicated channel. The query outputs the on/off status of applying the marker search range to all traces of the indicated channel.
The command sets the marker search range start range value on the active trace of the indicated channel. The query outputs the marker search range start range value on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter is in Hertz, Meters, or Seconds.
Query Parameters
<NR3> The output parameter is in Hertz, Meters, or Seconds.
The command sets the marker search range stop range value on the active trace of the indicated channel. The query outputs the marker search range stop range value on the active trace of the indicated channel.
Cmd Parameters
<NRf> The input parameter is in Hertz, Meters, or Seconds.
Query Parameters
<NR3> The output parameter is in Hertz, Meters, or Seconds.
The command toggles on/off the marker trace search range on the active trace of the indicated channel. The query outputs the on/off status of marker trace search range on the active trace of the indicated channel.
The command toggles on/off marker search tracking on the active trace of the indicated channel. The query outputs the on/off status of marker search tracking on the active trace of the indicated channel.
The command toggles on/off marker search track-and-center on the active trace of the indicated channel. The query outputs the on/off status of marker search track-and-center on the active trace of the indicated channel.
Cmd Parameters
<char> 1 | 0 | ON | OFF
Query Parameters
<char> 1 | 0
Range
NA
Default Value
0
Syntax Example
:CALC1:MARK:SEA:TRACK:CENT ON
:CALC1:MARK:SEA:TRACK:CENT?
:CALCulate{1-16}[:SELected]:MARKer:SET:CENTer
Description
The command sets the stimulus center range to the active marker range value on the active trace of the indicated channel. No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:SET:CENT
:CALCulate{1-16}[:SELected]:MARKer:SET:REFLevel
Description
The command sets the display reference level to the active marker response value on the active trace of the indicated channel. No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:SET:REFL
:CALCulate{1-16}[:SELected]:MARKer:SET:STARt
Description
The command sets the stimulus start range to the active marker range value on the active trace of the indicated channel. No query.
Cmd Parameters
NA
Range
NA
Default Value
NA
Syntax Example
:CALC1:MARK:SET:STAR
:CALCulate{1-16}[:SELected]:MARKer:SET:STOP
Description
The command sets the stimulus stop range to the active marker range value on the active trace of the indicated channel. No query.
The command sets the marker search target value for target searches on the active marker on the indicated channel and trace. The query outputs the marker search target value for target searches on the active marker on the indicated channel and trace.
The command sets the marker search transition polarity for target searches on the active marker on the indicated channel and trace. The query outputs the marker search transition polarity for target searches on the active marker on the indicated channel and trace.