The :SENSe{1-16}:CORRection:COLLect:LRL:BAND{1-5} subsystem commands provide control of Line-Reflect-Line device parameters, configuration, execution, and output reporting. Some commands require a 4-port VNA instrument.
LRL Calibration Subsystems
The LRL-related calibration commands are organized into five (5) subsystems in the following sections:
The command sets the reference frequency for loss of the given band on the indicated port-pair of the LRL calibration on the indicated channel.
The available port pair is 12 where it is fixed as Port 1 and Port 2. The command can be used by 2-port and 4-port VNA instruments.
The query outputs the reference frequency for loss of the given band on the indicated port-pair of the LRL calibration on the indicated channel. The available port pair is 12.
The command sets the line loss of the given band on the indicated port-pair of the LRL calibration on the indicated channel. The available port pair is 12.
The query outputs the line loss of the given band on the indicated channel. The available port-pair is 12.