VectorStar™ MS464xB Series Microwave Vector Network Analyzer User Interface Reference : Display Menus : Conversion and Display Utility Menus and Dialog Boxes
 
Conversion and Display Utility Menus and Dialog Boxes
CONVERSION Menu
Previous
DISPLAY Menu
Navigation
MAIN | Display | DISPLAY | Conversion | CONVERSION
CONVERSION Menu
Conversion (Off/On)
Select toggles conversion OFF and ON.
CONVERSION Menu Reflection/Transmission Button Selection Group
The five (5) reflection, transmission, and 1/S buttons form a button selection group where the selection of any one button de-selects the other four buttons.
Z:Reflection
Selects the Z:Reflection impedance display conversion.
Z:Transmission
Selects the Z:Transmission impedance display conversion.
Y:Reflection
Selects the Y:Reflection admittance display conversion.
Y:Transmission
Selects the Y:Transmission admittance display conversion.
1/S (One Divided By S)
Selects an inverted 1/S (One/S) display conversion.
DISPLAY SETUP Menu
Previous
DISPLAY Menu
Navigation
MAIN | Display | DISPLAY | Display Area Setup | DISPLAY SETUP
DISPLAY SETUP Menu 
1. DISPLAY SETUP Menu for 2-Port VNAs at left. See button descriptions below.
2. DISPLAY SETUP Menu for 4-Port VNAs at right. See button descriptions below.
Edit Chan. Title
Edit Channel Title button. Select displays the EDIT CHANNEL TITLE dialog box to create a user-defined title for the active channel.
EDIT CHANNEL TITLE Dialog Box
Chan. Title (Off/On)
Channel Title toggle button. Select toggles the channel title created by the EDIT CHANNEL TITLE dialog box OFF and ON. If ON, the user-defined channel title appears at the top of the channel display.
All Chan. Freq Label
All Channel Frequency Label button. Select toggles the frequency labels for all channels OFF and ON. The frequency labels appear at the bottom of each channel display. When ON, the labels typically show starting and stopping frequencies and IFBW settings. When OFF, the frequency labels are removed.
Responses Setup
This button is only available if the VNA is in 4-Port Mode.
If available, the button displays the RESPONSE SETUP menu where the user can perform a quick-set of the single-ended or mixed-mode response by choosing setting to:
Single-ended
2 differential pairs
1 differential pair and 2 singletons
1 differential pair and 1 singleton
Select displays the RESPONSE SETUP – 4-Port VNAs menu.
RESPONSES SETUP Menu – 4-Port VNAs
Mixer X-Axis
This menu item is disabled unless there is a mixer setup completed on the active channel. When it is enabled:
Clicking on the Mixer X-Axis menu item displays the X-Axis Display menu.
X-AXIS DISPLAY Menu
X-Axis Labels
Clicking on the “X-Axis Labels” toggle button will turn ON/ OFF the X-axis label display for the current active channel. See Figure: Trace Display with X-Axis Labels Turned On for and example display.
X-Axis Labels and Frequency Blanking: When System | Utility | Frequency Blanking option is turned ON, tall X-Axis labels on the display are turned off, and X-Axis and Labels Turn All X-Axis Labels On/Off menu selections are disabled and grayed out.
Trace Display with X-Axis Labels Turned On
Turn All X-Axis Labels On/Off
Clicking on the Turn All X-Axis Labels On/Off menu item displays the X-Axis Labels menu.
X-AXIS LABELS Menu
Edit Alternate Trace Name
Select displays the EDIT ALTERNATE TRACE NAME dialog box (shown below) for the active trace.
If the default Tr# label is replaced, up to 12 alphanumeric characters can be input to identify the trace. If the Tr# label is kept, up to 9 characters can be added for Traces 1 to 9, and up to 8 characters added for Traces 10 to 16. Alternate trace names can be duplicated or unique as required. The user defined trace name replaces the instrument default trace number abbreviation. For example, with Alternative Trace Name = OFF, Trace 1 is default labeled as:
Tr1 S11 Refl LogM RefLvl: 0 dB Res: 10 dB/Div
With Alternate Trace Name = ON, and a user-input Alternate Trace Name set as “DUT SN 12345”, the Trace 1 label becomes:
DUT SN12345 S11 Refl LogM RefLvl: 0 dB Res: 10 dB/Div
Once setup, a user-defined alternate trace name configuration can be saved as a setup and then recalled as a preset using:
MENU BAR | File | Save Setup | SAVE SETUP Dialog Box
MAIN | File | FILE | Save Setup |SAVE SETUP Dialog Box
Alternate Trace Name (On/Off)
For the selected trace, toggles the alternate trace name ON and OFF.
Turn Off All Alt. Trace Names
For all traces on the active channel, turns off all alternate trace names and restores the default trace names.
Turn On All Alt. Trace Names
For all traces on the active channel, turns ON all alternate trace names.
RESPONSES SETUP Menu – 4-Port VNAs
Prerequisites
The RESPONSES SETUP menu is only available if the VNA is in 4-Port mode and allows selection between four different modes.
Alternate Mixed Mode Control
The RESPONSES SETUP menu duplicates the functions available in the menu and dialog boxes below available in the RESPONSE 4-Port VNA menus:
RESPONSE Menu – 4-Port VNAs
MIXED MODE Setup Dialog Box – Two Diff. Pairs – 4-Port VNAs
MIXED MODE Setup Dialog Box – One Diff. Pair – One Singleton – 4-Port VNAs
MIXED MODE Setup Dialog Box – One Diff. Pair – Two Singletons – 4-Port VNAs
Previous
DISPLAY Menu
Navigation
MAIN | Display | DISPLAY | Display Area Setup | DISPLAY SETUP | Responses Setup | RESPONSES SETUP
RESPONSES SETUP SETUP Menu 
Single-Ended
Select sets the response mode to single-ended mode where any S-Parameter can be selected in the RESPONSE menu group.
S11, S12, S21, and S22 can be selected on the RESPONSE menu.
RESPONSE Menu – 4-Port VNAs
MAIN | Response | RESPONSE
S13, S23, S32, S33, S14, S24, S34, S41, S42, S43, S44 can be selected on the SINGLE-MODE menu
SINGLE-MODE Menu – 4-Port VNAs
MAIN | Response | RESPONSE | More Single-Mode | SINGLE-MODE
2 Diff. Pair
Two Differential Pairs button. Select sets all traces on the 4-Port VNA to mixed-mode with two differential pairs. When the warning dialog appears, select OK to continue. This is the same mixed-mode as set by the MIXED-MODE dialog box.
MIXED MODE Setup Dialog Box – Two Diff. Pairs – 4-Port VNAs
MAIN | Response | RESPONSE | Mixed-Mode | MIXED-MODE Dialog Box – Two Differential Pairs
1 Pair, 2 Singletons
Select sets all traces on the 4-Port VNA to mixed-mode with one differential pair and two singletons. When the warning dialog appears, select OK to continue. This is the same mixed-mode as set by the MIXED-MODE dialog box.
MIXED MODE Setup Dialog Box – One Diff. Pair – Two Singletons – 4-Port VNAs
MAIN | Response | RESPONSE | Mixed-Mode | MIXED-MODE Dialog Box – One Differential Pair and Two Singletons
1 Pair, 1 Singletons
Select sets all traces on the 4-Port VNA to mixed-mode with one differential pair and one singleton. When the warning dialog appears, select OK to continue. This is the same mixed-mode as set by the MIXED-MODE dialog box.
MIXED MODE Setup Dialog Box – One Diff. Pair – One Singleton – 4-Port VNAs
MAIN | Response | RESPONSE | Mixed-Mode | MIXED-MODE Dialog Box – One Differential Pair and One Singleton
X-AXIS DISPLAY Menu
Prerequisites
A valid mixer setup must be complete (via the Main | Application menu) for X-Axis Display menu to be active. See Mixer Setup for more information.
Previous
DISPLAY SETUP Menu
Navigation
MAIN | Display | DISPLAY | Display Area Setup | DISPLAY SETUP | X-Axis Display | X-AXIS DISPLAY
X-AXIS DISPLAY Menu 
IF
Select displays mixer IF on the display X-axis.
RF
Select displays mixer RF on the display X-axis.
LO
Select displays mixer LO on the display X-axis.
X-AXIS LABELS Menu
Previous
DISPLAY SETUP Menu
Navigation
MAIN | Display | DISPLAY | Display Area Setup | DISPLAY SETUP | Turn All X-Axis Labels On/Off | X-AXIS LABELS
X-AXIS LABELS Menu 
Turn Off All X-Axis Labels
Select will hide the X-axis labels in all the channels.
Turn On All X-Axis Labels
Select will show the X-axis labels in all the channels:
Trace Display with X-Axis Labels On
EDIT CHANNEL TITLE Dialog Box
Previous
DISPLAY SETUP Menu
Navigation
MAIN | Display | DISPLAY | Display Area Setup | DISPLAY SETUP | Edit Chan Title | EDIT CHANNEL TITLE Dialog Box
EDIT CHANNEL TITLE Dialog Box
Use an Input Device
To enter a channel title label, use any of the following devices:
Attached Keyboard: Use an attached USB keyboard by typing directly into the Channel Table name field name.
Attached Mouse: If a keyboard is not attached, use a mouse to click the required alphanumeric symbols.
QWERTY Keyboard: The available characters are those from a full QWERTY keyboard.
Enter a Channel Title Label
Use the buttons on the EDIT CHANNEL TITLE dialog box to enter the required text string into the Channel Title field:
Uppercase Characters: For UPPERCASE characters, click SHIFT. Click again to change to lowercase.
Cursor Up: To move the cursor to the start of the Channel Title field, click HOME.
Cursor Left: To move the cursor one character to the LEFT, click the <− arrow button.
Cursor Up: To move the cursor one character to the RIGHT, click the −> arrow button.
Delete to Left: To delete characters to the LEFT of the cursor position, click the BS (Backspace) button.
Delete to Right: To delete characters to the RIGHT of the cursor position, click DELETE.
Insert Character String: To insert the character string into the Channel Title field, click INSERT.
Save the Channel Label
To save the Channel Table character string, and return to the DISPLAY SETUP menu, click ENTER.