VectorStar™ MS464xB Series Microwave Vector Network Analyzer User Interface Reference : Mixer Setup
 
Mixer Setup
 
Chapter Overview
Other Application Menu Chapters
Application Menus and Mixer Dialog Boxes
Mixer Menu
Mixer Setup Dialog Overview
Mixer Setup Procedure Variants
MIXER SETUP – ACTIVE CHANNEL Dialog Box Variants
ACTIVE CHANNEL Dialog Box – Frequency-Based Sweep
Mixer Setup – Active Channel – Linear/Log Frequency Sweep – Menu Set
Mixer Setup – Active Channel – Information Required
Mixer Setup – Active Channel – Frequency Sweep – Procedure
ACTIVE CHANNEL Dialog Box – Power-Based Sweep
Mixer Setup – Active Channel – Power Sweep – Menu Set
Mixer Setup – Active Channel – Power Sweep – Information Required
Mixer Setup – Active Channel – Power Sweep – Procedure
MIXER SETUP – MULTI-CHANNEL Dialog Box Variants
MULTI-CHANNEL – Frequency-Based Sweep
Mixer Setup – Multi-Channel – Frequency Sweep – Menu Set
Mixer Setup – Multi-Channel – Frequency Sweep – Available Measurements
Mixer Setup – Multi-Channel – Frequency Sweep – Channel Assignments
Mixer Setup – Multi-Channel – Frequency Sweep – Procedure
MULTI-CHANNEL – Power-Based Sweep
Mixer Setup – Multi-Channel – Power Sweep – Menu Set
Mixer Setup – Multi-Channel – Power Sweep – Available Measurements
Mixer Setup – Multi-Channel – Power Sweep – Channel Assignments
Mixer Setup – Multi-Channel – Power Sweep – Procedure
Chapter Overview
This chapter provides information for the APPLICATION menu and its configuration controls for Mixer setup.
Other Application Menu Chapters
The other chapters in this manual on APPLICATION menus with specific application feature focus are:
Application Menus – Overview
Multiple Source
Broadband/mmWave
Noise Figure (Option 41)
Differential Noise Figure (Option 48)
NxN
PulseView™
DifferentialView™ (True Mode Stimulus)
IMDView™
Advanced Fast CW
Application Menus and Mixer Dialog Boxes
Note 
The Mixer Setup buttons are not present when the VNA is in 4-Port mode.
Mixer Menu
Mixer Setup Dialog Overview
MIXER SETUP – ACTIVE CHANNEL Dialog Box Variants
ACTIVE CHANNEL Dialog Box – Frequency-Based Sweep
ACTIVE CHANNEL Dialog Box – Power-Based Sweep
MIXER SETUP – MULTI-CHANNEL Dialog Box Variants
MULTI-CHANNEL – Frequency-Based Sweep
MULTI-CHANNEL – Power-Based Sweep
Mixer Menu
Mixer Menu
See the other APPLICATION menu chapters for descriptions of other menu button selections.
Mixer Setup (Active Channel)
Select displays the single channel version of the mixer setup, the MIXER SETUP [SWEEP TYPE] dialog boxes. The setup allows setting the sweep type, the port correspondence to RF and IF, and the signal source for the LO. There are separate setup configurations for frequency-based sweep and power-based sweep.
MIXER SETUP – ACTIVE CHANNEL Dialog Box Variants
Mixer Setup (Multi-Channel)
Select displays the MIXER SETUP CONFIGURATION dialog boxes. The mixer setup dialogs provide setup guidance for different mixer types, and supports measurement of various parameters on different channels. Once the mixer configuration and measurement requirements are input, the system responds with the necessary calibrations required. The mixer measurement configuration can be saved and recalled.
MIXER SETUP – MULTI-CHANNEL Dialog Box Variants