VectorStar™ MS464xB Series Microwave Vector Network Analyzer User Interface Reference : Application Menus – Overview
 
Application Menus – Overview
 
Chapter Overview
Detailed Application Menu Chapters
APPLICATION Menu Overview
APPLICATION Menu
APPLICATION Menu Instrument Mode Controls
APPLICATION Menu – Receiver Configuration
RCVR CONFIG Menu
Receiver Setup Section:
APPLICATION Menu – True Mode Stimulus Setup
TRUE MODE STIMULUS SETUP Menu
APPLICATION Menu – Noise Figure Setup Menu
NOISE FIGURE SETUP Menu
DIFFERENTIAL NOISE FIGURE SETUP Menu
APPLICATION Menu – PulseView™ Setup
PULSEVIEW™ SETUP Menu
APPLICATION Menu – Advanced Fast CW Setup
FAST CW SETUP Menu
APPLICATION Menu – IMDView™ Setup
IMDVIEW™ SETUP Menu
APPLICATION Menu – Mixer Setup
MIXER Menu
Chapter Overview
This chapter provides information for the single APPLICATION menu which sets the instrument measurement mode. It provides links to the relevant APPLICATION menu chapters, each of which focuses on a separate VNA application and configuration controls.
The APPLICATION menu can be conveniently divided into the following the following groups:
Instrument mode selection
Receiver configuration
Application and VNA configuration setups
In general, the receiver configuration is selected first, and then the setup for that configuration completed. Each is briefly described in the sections below followed by a cross reference to a full chapter description of each mode and control group.
Detailed Application Menu Chapters
The other chapters in this manual on APPLICATION menus with specific application feature focus are:
Multiple Source
Broadband/mmWave
Noise Figure (Option 41)
Differential Noise Figure (Option 48)
Mixer Setup
NxN
PulseView™
DifferentialView™ (True Mode Stimulus)
IMDView™
Advanced Fast CW